Qwiic Twist RGB Rotary Encoder Breakout - module with digital rotary encoder and RGB backlight
ID: 573846
zł129.83
Tax included
zł105.55 tax excl.
Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates information after moving with 24 levels per revolution. It also detects the direction of rotation, which gives additional control possibilities. In addition, it has a built-in button, making it perfect as a structuring module, e.g. for menu operation. There are two Qwiic connectors on the board. The product page includes the user manual and the Arduino library.
Features
- 24 levels per 360° rotation
- Rotation direction detection
- Software-configurable I2C address - up to 111 devices on one bus
- Built-in button
- LED RGB controlled by PWM
- I2C communication up to 400kHz
- I2C address: 0x3F (default), 0x3E
- 2 x Qwiic connectors
- Voltage: 3.3V
- Current consumption: 2.8 mA (LED off), 40.6 mA (with LED)
- Dimensions: 25.4 x 30.5 x 25 mm
573846
You might also like
No product available!
No product available!
Available
Available
Other products in the same category (16)
The module is equipped with an AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface.
zł10.38
6 weeks
No product available!
Module with Grove connector equipped with AS5600 magnetic encoder with a resolution of 12-bit. It allows for non-contact measurement of the angle of rotation. The module has an analog/PWM output and an I2C interface. Seeed Studio 101020692
zł33.92
6 weeks
No product available!
Add quadrature encoders to your 20D mm metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and Hall effect sensors to provide 20 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
zł42.14
24h
Available quantity: 6
Available
360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502
zł49.94
24h
Available quantity: 2
Available
Encoder for Pololu Wheel 42x19mm
zł66.64
24h
Available quantity: 1
Available
The module is designed to support incremental encoders. It reads the rotation of the encoder and transmits the information via the I2C interface. Adafruit 4991
zł36.90
4 weeks
No product available!
The module with an incremental encoder with channels A and B. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 103020030
zł34.93
6 weeks
No product available!
AB two-phase pulse wave, measured by two infrared reflective sensor. These two sensor pulse waveform is close to a phase difference of 90 degrees, through the AB two-phase lead and lag of the waveform judged wheel forward rotation or the reverse. SEN0116
zł23.23
24h
Available quantity: 3
Available
Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface
zł12.90
Delivery date unknown
No product available!
Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522
zł58.79
24h
Available quantity: 3
Available
Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673
zł143.05
24h
Available quantity: 1
Available
Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752
zł42.57
24h
Available quantity: 4
Available
The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the Pololu dual-shaft mini plastic gearmotors. Pololu 1523
zł43.51
24h
Available quantity: 2
Available
A set of magnetic encoders for the Romi Chassis chassis. With their help, we can measure the distance traveled by our mobile robot or control the engine speed. Pololu 3542
zł45.93
6 weeks
No product available!
Set of two magnetic encoders for use with micro motors. Side mounting, set of 2. Pimoroni PIM605
zł35.26
24h
Available quantity: 8
Available
Incremental encoder (horizontal) with a resolution of 15 pulses per revolution. Equipped with a switch
zł44.90
24h
Available quantity: 5
Available
Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083