Qwiic EEPROM - module with 512kbit (64kB) EEPROM memory

Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-16918

Ultrasonic distance sensor with a measuring range from 2 to 400 cm. It communicates via a standard interface (Echo, Trigger) or the I2C bus. SparkFun SEN-17777

Qwiic Cable - 500mm

Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 55x35°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14844

Air quality sensor module based on the SGP40 system. The board is equipped with Qwiic connectors. SparkFun SEN-18345

Module with relay up to 5.5 A and 240 V AC controlled by the I2C interface. SparkFun COM-15093

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19037

Module with a deflection sensor with two measuring probes. The board houses the ADS1015 converter, which is an ADC converter with an output in the form of an I2C interface. SparkFun SEN-14666

GPS module with 72-channel GNSS SAM-M8Q receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART and I2C interfaces. SparkFun GPS-15210

Intermediate module of the communication system based on QwiicBus. It allows you to extend the range of the I2C bus. SparkFun COM-18000

Module with a differential pressure sensor SDP31 dedicated to measuring the flow rate and air velocity. The arrangement is characterized by wide measuring range from 260 to 1260 hPa and high measurement resolution (0.01 hPa). I2C or SPI communication. SparkFun SPX-14767

Air quality sensor module based on SGP30 system. The board has been equipped with Qwiic connectors. SparkFun SEN-16531

The Qwiic connector overlay provides an easy-to-install way to add Qwiic connectors to Arduino Nano inserts. Communication takes place via the I2C interface. Sparkfun DEV-16789

Module with 3-axis accelerometer and gyroscope LSM6DSV16X. The chip is a low-power IMU optimized for IoT devices with data processing capabilities using machine learning. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-21325

Starter kit with Qwiic modules designed to work with the Raspberry Pi. The set consists of an overlay for Raspberry Pi with a standard 40-pin connector and four Qwiic connectors, OLED display, VCNL4040 distance sensor and environmental sensors. SparkFun KIT-16841

Sound module supported by I2C interface, which allows to generate sound signals in simple projects thanks to Qwiic system and ATtiny84 microcontroller. With support of Arduino libraries, users can control volume, frequency and duration of sound, which makes it ideal for applications such as alarms or signals in robots. SparkFun BOB-24474