Qwiic SparkX Differential Pressure Sensor - module with SDP31 differential pressure sensor
ID: 1186187
5902186318731
zł309.00
Tax included
zł251.22 tax excl.
Module with a differential pressure sensor SDP31 dedicated to measuring the flow rate and air velocity. The arrangement is characterized by wide measuring range from 260 to 1260 hPa and high measurement resolution (0.01 hPa). I2C or SPI communication. SparkFun SPX-14767
Description
Module with a differential pressure sensor SDP31 dedicated to measuring the flow rate and air velocity. It is based on the next generation CMOSens® sensor chip which is at the heart of Sensirion's new differential pressure and flow sensing platform. Allows you to measure differential pressures in the range of +/- 500 Pascals (+/- 0.005 atm) thanks to the high and low pressure probes spaced 4.3 mm apart. The sensor has a high measuring speed, excellent accuracy and long-term stability, and exhibits no zero point drift. It provides extended functionality such as intelligent averaging, multiple temperature compensation modes, configurable I2C address and interrupts. The I2C address can be configured using jumpers on the back of the board. The module includes a power LED, a pair of Qwiic connectors, I2C pads, and pull-up resistors.
Features
- Sensirion SDP31 differential pressure sensor
- Pressure measuring range: -500 to 500 Pa (-2 to 2 inH2O)
- Temperature measurement range: -40°C to +85°C
- Pressure and temperature resolution: 16 bits
- Zero point accuracy: 0.1 Pa
- Flow step response time: < 3ms
- Calibration for: air, N2
- Calibrated temperature range: -40°C to +85°C
- Operating temperature range: -40°C to +85°C
- Startup time: 25ms
- I2C address (configurable): 0x21, 0x22, 0x23
- Supply voltage: 2.7 to 5.5 V
- Interrupt output
- 2 x Qwiic connector
- Power LED
- I2C pull-up resistors
1186187
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832
zł285.20
24h
Available quantity: 1
Available
Data logger programmed to automatically record data from GPS and Qwiic series sensors. It has a built-in ESP32-WROOM-32E module and IMU sensors ISM330DHCX (accelerometer and gyroscope) and MMC5983MA (magnetometer). SparkFun DEV-20594
zł414.85
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C or SPI. SparkFun SEN-20170
zł109.90
24h
Available quantity: 1
Available
Module with 20x4 characters LCD display and ATMega328p microcontroller. The user can communicate with the module through one of the serial interfaces: UART, I2C or SPI. SparkFun LCD-16398
zł151.41
3 weeks
No product available!
A cryptography kit that allows you to learn the basics of cryptographic authentication and the ATECC508A cryptographic co-processor. SparkFun KIT-18303
zł509.69
3 weeks
No product available!
Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-18566
zł52.20
24h
Available quantity: 2
Available
TPL5110 external counter module to turn on a project after a set time and save energy. The TPL5110\'s delay is configurable with resistors ranging from 100 ms to two hours. SparkFun PRT-15353
zł39.29
24h
Available quantity: 2
Available
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 55x35°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14844
zł504.44
3 weeks
No product available!
Hub with Qwiic connectors that allows you to connect several boards to the evaluation kit. There is no built-in control system, but only splits one connector into 3 more. SparkFun BOB-18012
zł10.50
24h
Available quantity: 3
Available
Kit for building a communication system based on QwiicBus. It contains two endpoint modules (EndPoint), an intermediary module (MidPoint) and two Ethernet cables. SparkFun KIT-17250
zł289.68
3 weeks
No product available!
Available
Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-16918
zł56.25
24h
Available quantity: 2
Available
Module with a capacitive touch sensor based on the CAP1203 chip. There are three touch panels on the board that can be used as separate sensors (pins CS1, CS2, CS3) or as a touch slider. I2C communication. SparkFun SEN-15344
zł35.09
24h
Available quantity: 1
Available
Module with a 4-element 14-segment display. The board is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun COM-18565
zł51.45
24h
Available quantity: 2
Available
SparkFun Qwiic kit. Contains 10 wires of different lengths and tips. It allows you to connect Qwiic modules to a programming platform or to a prototype board. SparkFun KIT-15081
zł55.34
24h
Available quantity: 10
Available
JST-SH 4-pin SMD connector for modules with Qwiic connectors. Pins\' pitch is 1 mm. Qwiic allows you to connect sensors via the I2C bus. SparkFun PRT-16766
zł4.11
3 weeks
No product available!
Intermediate module of the communication system based on QwiicBus. It allows you to extend the range of the I2C bus. SparkFun COM-18000
zł115.36
24h
Available quantity: 1
Available
Module with 4 relays JZC-11F with a load of 5A. It enables switching devices with high power using a microcontroller. I2C communication. SparkFun COM-16566
zł170.59
24h
Available quantity: 1
Available
Module with a differential pressure sensor SDP31 dedicated to measuring the flow rate and air velocity. The arrangement is characterized by wide measuring range from 260 to 1260 hPa and high measurement resolution (0.01 hPa). I2C or SPI communication. SparkFun SPX-14767