Qwiic Micro 6DoF IMU - a module with a 3-axis accelerometer and a gyroscope ISM330DHCX
ID: 1181126
zł202.72
Tax included
zł164.81 tax excl.
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a 3-axis accelerometer and an industrial-grade ISM330DHCX gyroscope. It has a user selectable measuring range of ±2g/±4g/±8g/±16g for the accelerometer and ±125/±250/±500/±1000/±2000/±4000 dps for the gyro. It is able to measure accelerations with a data rate of 12.5 Hz to 6.7 kHz and angular velocity with a frequency of 1.6 Hz to 6.7 kHz. The sensor is equipped with a calibration and compensation circuit which ensures excellent performance in a wide temperature range from -40 to +105 °C. It is powered with the voltage 3.3 V, and communication takes place via the I2C interface (Qwiic connector) or SPI. Full documentation and examples of use are available on the product page.
Features
- Accelerometer measuring scale: ±2g/±4g/±8g/±16g
- Gyro measurement scale: ±125/±250/±500/±1000/±2000/±4000 dps
- 16 bit data output
- I2C or SPI interface
- I2C address: 0x6B (default), 0x6A
- Data transmission frequency: from 12.5 Hz to 6.7 kHz for the accelerometer and from 1.6 Hz to 6.7 kHz for the gyroscope
- Working temperature: -40 to + 105°C
- Temperature compensation
- I2C sensor hub function
- Built-in FIFO up to 9 kB
- Machine learning function
- Built-in functions and interruptions: tilt detection, free fall, wake up, 6D / 4D orientation, click and double click
- Built-in pedometer
- 2 x Qwiic connectors
- Working voltage: 3.3V
1181126
Data sheet
- Interface
- I2C
- Type of sensor
- ISM330DHCX
- Module type
- 6DoF
- Power supply voltage
- 1,71 - 3
- Sensor type
- Akcelerometr i żyroskop
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł9.64
24h
Available quantity: 5
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł6.94
24h
Available quantity: 16
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł10.55
24h
Available quantity: 14
Available
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C or SPI interface. SparkFun SEN-19764
zł192.13
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4502
zł110.20
24h
Available quantity: 3
Available
Module with 9-axis IMU ICM-20948 sensor (3-axis accelerometer, gyroscope and magnetometer and DMP) and BMP280 pressure sensor. Communication via I2C. Waveshare 10 DOF IMU Sensor (D)
zł434.98
4 weeks
No product available!
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
zł27.47
24h
Available quantity: 188
Available
Small 9 DoF IMU module with 3-axis gyroscope and accelerometer (LSM6DSO) and 3-axis magnetometer (LIS3MDL). It is equipped with an I2C interface, a voltage stabilizer and a logic level converter. Pololu 2862
zł100.52
24h
Available quantity: 4
Available
Module with 3-axis accelerometer and gyroscope LSM6DSV16X. The chip is a low-power IMU optimized for IoT devices with data processing capabilities using machine learning. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-21336
zł94.88
24h
Available quantity: 2
Available
Module with 6-axis BMI160 motion sensor (accelerometer and gyroscope) with 16-bit data resolution. It is supplied with the voltage in the range from 3.2 to 6 V. I2C communication. DFRobot SEN0250
zł50.05
4 weeks
No product available!
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
zł180.55
24h
Available quantity: 3
Available
Module with acceleration and rotational speed sensor based on the LSM6DSOX system. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4438
zł67.67
24h
Available quantity: 4
Available
Module with 9-axis IMU dedicated to Feather plates. It connects the ISM330DHCX (accelerometer and gyroscope) and LIS3MDL (magnetometer) systems. Communication via the I2C interface. Adafruit 4569
zł173.93
24h
Available quantity: 1
Available
6DoF module with MPU6050 (3-axis accelerometer, 3-axis gyroscope) powered with 3-5V. I2C communication interface
zł13.55
24h
Available quantity: 29
Available
Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP. Communication via I2C or SPI. Adafruit 4554
zł85.92
24h
Available quantity: 6
Available
Module with acceleration and rotational speed sensor based on the LSM6DSO32 chip. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4692
zł68.62
24h
Available quantity: 3
Available
Module with acceleration and rotational speed sensor based on the MPU-6050 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 3886
zł95.42
24h
Available quantity: 3
Available
The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.
zł1,105.12
24h
Available quantity: 1
Available
The module with the ADIS16470 chip, which combines a 3-axis accelerometer and a gyroscope. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020672
zł1,941.11
6 weeks
No product available!
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
zł31.44
6 weeks
No product available!
Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-20176