

10-axis inertial sensor module, comprising: accelerometer, gyroscope, magnetometer and barometer. The sensor is ideal for studying the movement of the object on which it is mounted. It is able to monitor movement, position, orientation, altitude and ambient temperature. Ideally suited to solutions such as drones, balancing robots or interfaces requiring the movement of human limbs to control the devices. The sensor module communicates with the microcontroller using the I2C interface.
Pin number | Symbol | Description |
---|---|---|
1 | VCC | 3.3 V - 5.5 V power supply |
2 | GND | Mass |
3 | SDA | I2C data |
4 | SCL | I2C clock signal |
5 | INT | Interrupt output MPU9255 |
6 | fsync | Frame synchronization signal MPU9255 |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
Versatile 9DOF sensor with accelerometer, magnetometer and gyroscope, supporting I²C and SPI interfaces, enabling precise measurement of motion, orientation and temperature, with easy integration with Arduino and microcontrollers. Adafruit 3387
Small 9 DoF IMU module with 3-axis gyroscope and accelerometer (LSM6DSO) and 3-axis magnetometer (LIS3MDL). It is equipped with an I2C interface, a voltage stabilizer and a logic level converter. Pololu 2862
Module with 6-axis IMU LSM6DSO sensor, which combines a 3-axis accelerometer and gyroscope, as well as a 9kB FIFO buffer and event handling functions. Communicates via I2C or SPI. SparkFun SEN-18020
Module with acceleration and rotational speed sensor based on the LSM6DSO32 chip. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4692
Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252
Compact 9DOF IMU sensor with accelerometer, gyroscope and magnetometer, supporting advanced data fusion with Arm Cortex M0 processor and CEVA SH-2 software, offering I²C, SPI and UART-RVC interfaces and a wide range of functions for precise motion and orientation analysis. Adafruit 4754
No product available!
Module with 6-axis IMU sensor MPU6886, which combines a 3-axis accelerometer and a 3-axis gyroscope. M5Stack U095
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces.
The Digilent Pmod NAV uses the LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, plus the LPS25HB digital barometer to provide users with 10-DOF functionality. Digilent 410-326
No product available!
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
A compact 9-DOF sensor that combines a 3-axis accelerometer, magnetometer, and gyroscope to precisely determine an object\'s orientation. With support for the I2C/SPI bus, compatibility with the STEMMA QT system, and 3V/5V power supply, it is suitable for robotics, 3D navigation, VR, AR, and stabilization systems. Adafruit 4634
No product available!
Sensor module for use in the area of virtual reality (VR). It was based on the BNO080 chip, which integrates the accelerometer, gyroscope and magnetometer with the ARM Cortex M0+ microcontroller. SparkFun SEN-14686
No product available!
The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.
Module with 3-axis accelerometer and gyroscope LSM6DSV16X. The chip is a low-power IMU optimized for IoT devices with data processing capabilities using machine learning. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-21336
Module with a 6-axis IMU sensor (accelerometer and gyroscope) that allows you to measure acceleration and rotational speed in a wide range of ±30g and ±4000dps. Communicates via I2C. Adafruit 4464
Module with LSM6DS3 sensor that combines a 3-axis accelerometer and a 3-axis gyroscope. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020012
Module with 6-axis BMI160 motion sensor (accelerometer and gyroscope) with 16-bit data resolution. It is supplied with the voltage in the range from 3.2 to 6 V. I2C communication. DFRobot SEN0250
A module with an acceleration and rotational speed sensor based on the LSM6DS3TR-C system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 5543
IMU inertial sensor, 10-axis, barometer with temperature compensation, low energy consumption