.png)
- Out-of-Stock
NVIDIA Jetson AGX Orin - development kit with ARM Cortex-A78AE + 32GB RAM
ID: 1178563
Development kit with a processor equipped with 8 ARM Cortex-A78AE v8.2 cores and the NVIDIA Ampere graphics system consisting of 1792 cores supporting CUDA technology. NVIDIA 945-13730-0005-000.
Description
NVIDIA Jetson AGX Orin Developer Kit with SoC chip containing eight 64-bit ARM Cortex-A78AE cores and Ampere graphics chip consisting of 1792 cores supporting CUDA technology and 56 Tensor cores. The system is supported by DDR4 RAM memory with a capacity of 32 GB, eMMC memory with a capacity of 64 GB, Ethernet connectivity and communication protocols such as UART, SPI, CAN, I2C, I2S or DMIC. The user also has numerous USB interfaces, M.2 Key M and M.2 Key E, a DisplayPort interface and a microSD card slot.
With up to 275 TOPS of performance in handling the NVIDIA SI software stack, this development kit enables the development of advanced robotics and AI applications for the manufacturing, logistics, retail, services, agriculture, smart cities, healthcare and life science industries.
Properties
Jetson AGX Orin
- NVIDIA Ampere GPU with 1972 CUDA cores and 56 Tensor cores
- CPU 12-core ARM Cortex-A78AE v8.2 64-bit processor, 3 MB L2 + 6 MB L3
- RAM: 32 GB 256-bit LPDDR4
- 64 GB eMMC 5.1 memory
- DL Accelerator (2x) NVDLA
- PVA v2.0 vision processor
- Power: 15 to 60 W
I/O motherboard
- 16 lane MIPI CSI-2 camera connector
- PCIe: x16 PCIe, x8 PCIe Gen4
- M.2 Key M: x4 PCIe Gen 4
- M.2 Key E: x1 PCIe Gen 4, USB 2.0, UART, I2S
- USB Type C: 2x USB 3.2 Gen2 with USB-PD
- USB Type A: 2x USB 3.2 Gen2, 2x USB 3.2 Gen1
- USB Micro-B: USB 2.0
- Ethernet RJ45 (up to 10 GbE)
- DisplayPort 1.4a (+ MST)
- MicroSD card slot
- 40-pin connector (I2C, GPIO, SPI, CAN, I2S, UART, DMIC)
- 12-pin automation connector
- 10-pin audio panel connector
- 10-pin JTAG connector
- 4-pin fan connector
- 2-pin RTC emergency power connector
- DC power socket
- Power and reset buttons
- Dimensions: 110 x 110 x 71.65 mm
Kit contains
- Jetson AGX Orin 32GB module
- Motherboard
1178563
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
zł77.90
Delivery date unknown
No product available!
microSDHC memory card with a capacity of 32GB, Class10 UHS-I U1 speed class, maximum read speed of up to 100MB/s, supplied with an SD adapter. GoodRam M1AA-0320R12
zł49.90
24h
Available quantity: 65
Available
Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera
zł229.00
Delivery date unknown
No product available!
Module with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier
zł7,742.69
Delivery date unknown
No product available!
Other products in the same category (16)
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+
Retired
No product available!
LPCXpresso55S16 evaluation kit with LPC55S16 microcontroller with ARM Cortex-M33 core. The board contains built-in LPC-Link2, audio subsystem, accelerometer, USB interfaces and Arduino connectors. NXP LPC55S16-EVK
Retired
No product available!
The MIMXRT1062DVL6A Processor Evaluation Kit, which runs up to 600 MHz, has 256 MB of SDRAM, 512 MB of Flash and 64 QSPI Flash. NXP MIMXRT1060-EVK
Retired
No product available!
Starter kit with the Kinetis K32 L2B microcontroller, integrated with the OpenSDA programmer-debugger, LCD display, accelerometer and MEMS magnetometer and USB connector. Conclusions compatible with Arduino. NXP FRDM-K32L2B3
Retired
No product available!
Wired mouse with a precise optical sensor. It has a button to change the resolution in four levels: 800/1200/1600/2400 DPI. 1.8m cable with USB plug. Natec NMY-0667
Retired
No product available!
Easy PET-G filament in black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Black
Retired
No product available!
Easy PET-G filament in pure transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Pure Transparent
Retired
No product available!
Easy PET-G filament in silver with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Silver
Retired
No product available!
Easy PET-G filament in white with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G White
Retired
No product available!
Easy PLA filament in graphite, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Graphite
Retired
No product available!
Easy PLA filament in gray, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Gray
Retired
No product available!
Easy PLA filament in inox, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Inox
Retired
No product available!
Easy PLA filament in red, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Red
Retired
No product available!
Easy PLA filament in Vertigo, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Vertigo
Retired
No product available!
Easy PLA filament in white, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA White
Retired
No product available!
Easy PLA filament in yellow, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Yellow
Retired
No product available!
Development kit with a processor equipped with 8 ARM Cortex-A78AE v8.2 cores and the NVIDIA Ampere graphics system consisting of 1792 cores supporting CUDA technology. NVIDIA 945-13730-0005-000.