OpenEP4CE6-C Standard kit with Altera FPGA EP4CE6E22C8N and baseboard - Waveshare 6724

Description

FPGA development board CoreEP4CE6 included with DVK601 base board.

CoreEP4CE6 is a starter board with EP4CE6E22C8N FPGA from Altera's Cyclone IV family. It was equipped with basic elements needed to start the system, including voltage stabilizers 1.2 V, 2.5 V and 3.3 V as well as configuration and reset buttons. The user has at his disposal 4 LEDs and all pins of the system led out to pin connectors with a pitch of 2.54 mm. It is powered by the DC Jack 5V connector and programmed via the JTAG interface.

The DVK601 is a base board dedicated to the FPGA set. It offers all interfaces derived from connectors located on the edge of the board and allows for expansion with various optional add-on boards for specific applications. The modular and open design makes it ideal for starting application development with FPGAs.

Full documentation and numerous program examples are available on the product page.

Features

• FPGA chip EP4CE6E22C8N
• 50 MHz frequency
• Working voltage: 1.1 to 3.465 V
• Housing QFP144
• Number of I / O lines: 80
• Number of LEs: 6K
• RAM memory: 270 Kb
• Number of PLL: 2
• Built-in EPCS16SI8N configurator
• NCONFIG and RESET buttons
• 4 LEDs
• All I / O lines led out to pin connectors
• JTAG interface connector for programming and debugging
• Pin connectors with a pitch of 2.54 mm
• Voltage stabilizers 1.2 V, 2.5 V and 3.3 V
• Base board

Kit contains

• CoreEP4CE6 board
• Base board
• USB power cord
• 2 x 4-pin cable
• 2 x 2-pin cable