- Out-of-Stock
Inventor 2040 W - kit with base board and Raspberry Pi Pico W
ID: 1181339
Universal set with Raspberry Pi Pico W and base board equipped with motor driver, audio output, buttons and LEDs and Qwiic/Stemma connector. Pimoroni PIM633
Description
A set with a universal base board and Raspberry Pi Pico W. The control is handled by the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores operating at 133 MHz, 264 KB RAM and 2 MB of external QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity.
On the base board, the user will find a two-channel DRV8833 motor driver with JSH-SH connectors and LEDs indicating the direction of engine rotation. In addition, there is a connector with an audio output for connecting a loudspeaker, a set of 3-pin connectors with PWM output for servicing and GPIO pins with an analog input function. The board also has 12 addressable RGB LEDs, buttons, and two Qwiic/Stemma QT connectors that allow you to connect additional sensors with an I2C interface. The module can be powered by a battery and is compatible with boards from the Breakout Garden series (place for soldering the connector).
Thanks to such a rich set of pins, the set can be used as a robot controller, element of a home automation system or other remotely controlled device.
Features
- Raspberry Pi Pico W:
- Dual Arm Cortex M0 + operating at up to 133 MHz with 264 KB of SRAM
- 2MB QSPI flash memory supporting XiP
- Powered and programmable via USB micro-B
- 2.4 GHz wireless communication
- 2 JST-SH connectors (6 pins) for connecting motors
- Double H-bridge motor controller (DRV8833)
- Motor current limit (0.5 A)
- LEDs to show the direction of the motor
- 2-pin connector (Picoblade compatible) for speaker connection
- JST-PH connector (2 pin) for connecting the battery (input voltage 2.5V - 5.5V)
- 6 sets of connectors for connecting 3-pin servos
- 6 sets of pins for GPIO (3 of them support ADC)
- 12 x addressable RGB LEDs
- User button
- Reset button
- 2 x Qw/ST connectors
- Place for the Breakout Garden connector
Kit contains
- Inventor 2040 W Base Board
- Raspberry Pi Pico W
1181339
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.21
24h
Available quantity: 12
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 26
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.90
24h
Available quantity: 10
Available
Flexible 4-core cable, 500 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17257
zł13.90
Delivery date unknown
No product available!
Other products in the same category (16)
Set with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020292
Retired
No product available!
Set with a measuring module and a probe for measuring the pH in aqueous solutions. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020291
Retired
No product available!
Module with a driver designed for small DC motors. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020084
Retired
No product available!
Module with a water level sensor with a measuring range of up to 10 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020635
Retired
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070024
Retired
No product available!
Module with a 3-axis H3LIS331DL accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020071
Retired
No product available!
Audio player module with MP3 decoder and microSD card slot. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 107020069
Retired
No product available!
Module with a sensor for measuring the heart rate PAH8001EI-2G. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020082
Retired
No product available!
Module with a 12-channel capacitive touch sensor MPR121 in a set with 4 touch probes. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020047
Retired
No product available!
2.4 GHz WiFi module based on W600. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020031
Retired
No product available!
Module with 1-axis ADXL1001 accelerometer with a range up to ± 100g. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020633
Retired
No product available!
Module with a 3-axis ADXL372 accelerometer with a measuring range up to ± 200g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020632
Retired
No product available!
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
Retired
No product available!
Module with a 3-axis ADXL356C accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020638
Retired
No product available!
Module with a 3-axis ADXL357 accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020639
Retired
No product available!
The module with the ACS725 current sensor with a direct current measuring range up to 10 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020616
Retired
No product available!
Universal set with Raspberry Pi Pico W and base board equipped with motor driver, audio output, buttons and LEDs and Qwiic/Stemma connector. Pimoroni PIM633