- Out-of-Stock
Wio ESP32 CAN Dev Kit - a set with the ESP32-C3 module and LoRa communication
ID: 1182547
5906623437900
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
Description
Development kit with ESP32 module and LoRa communication. It features an integrated ESP32-C3 chip with a 32-bit RISC-V core processor that operates at up to 160MHz. It comes with 2.4GHz Wi-Fi communication and supports Station Mode, SoftAP Mode, SoftAP Mode. It runs in ultra-low power mode, also supporting Bluetooth 5 and Bluetooth Mesh. The chip has 400 kB of SRAM and 4 MB of Flash. The kit uses the Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol in the global frequency band with a transmission range of up to 10 km.
An important element of the set are two CAN interfaces. The CAN bus (Controller Area Network) is used to enable microcontrollers and devices to communicate with each other in networks used e.g. in vehicles, which allows for control and data collection. These devices are also called electronic control units (ECU) and enable communication between all parts of the vehicle. CAN is a serial communication bus designed for industrial and automotive applications.
The board provides a rich set of interfaces, including Grove connectors for connecting sensors and modules. It is designed according to industry standards with a wide operating temperature ranging from -40℃ to 85℃ and an output power of up to +20.8dBm at 3.3V.
Features
- ESP32-C3 SoC Processor, Single-core 32-bit RISC-V processor with up to 160MHz
- Communication WiFi 2.4 GHz, Bluetooth 5.0, Bluetooth Mesh
- Power supply: 5V/USB, Lipo battery 3.7V, DC input 7-28V
- Voltage output: 3.3V
- Output power: Up to 20.8 dBm at 3.3 V
- Frequency band: EU868/US915/AU915/AS923/KR920/IN865
- Protocol: LoRaWAN
- Sensitivity: 116.5dBm to -136dBm
- Modulation: LoRa, (G)FSK, (G)MSK, BPSK
- CAN 2.0: up to 1Mbps
- CAN-FD: up to 5Mbps
Kit contains
- Wi-E5 CAN Development Board
- EU868 antenna
- u.FL antenna
- Case
1182547
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development kit based on ATSAMD51 with WiFi and BLE 5.0. It is equipped with a 2.4-inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, light sensor and infrared transmitter (IR 940nm). Seeed Studio 102991299
zł193.97
24h
Available quantity: 4
Available
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
zł109.00
24h
Available quantity: 1
Available
Other products in the same category (16)
Audio recorder module that allows for multiple recording and playback of sounds up to 6 seconds long
Retired
No product available!
Shield Arduino with dual driver for DC motors VNH2SP30. It allows you to control two DC motors with a supply voltage of up to 16 V and a current consumption of up to 30 A. Monster Moto Shield
Retired
No product available!
Module with a single-channel driver of DC motors VNH2SP30. It allows you to control a DC motor with a supply voltage of up to 16 V and a current consumption of up to 30 A. Mini Monster Moto Driver
Retired
No product available!
No product available!
3D stereo camera module, which was built of two cameras with OV9281 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0263
Retired
No product available!
The camera set with the AR1335 sensor allows you to control zoom. Works with Raspberry Pi minicomputers. The camera is equipped with a matrix with a resolution of 13 MPx. ArduCAM B016713MP
Retired
No product available!
Retro wireless controller with built-in Bluetooth 4.0 module and USB type C output. SparkFun WIG-17264
Retired
No product available!
Module with e-Paper display, 6" diagonal and 800x600 px resolution. Communication via USB, SPI or I80 interface. Waveshare 6inch e-Paper HAT
Retired
No product available!
10.3" e-Paper monitor with an HDMI interface. It is characterized by high resolution 1872x1404 pixels, wide viewing angle and low energy consumption. Waveshare EINK-DISP-103-EU
Retired
No product available!
Black and white e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Without PCB. Waveshare 12.48inch e-paper
Retired
No product available!
The meter is designed to measure temperature in the range from -32 ℃ to 600 ℃. It allows you to measure the temperature of machine elements or vehicles in a non-invasive manner. Uni-T UT301C+
Retired
No product available!
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. SPI interface. Waveshare 4.2inch e-Paper Module (C)
Retired
No product available!
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. SPI interface. Waveshare 2.9inch e-Paper Module (C)
Retired
No product available!
3-color e-Paper display with 2.9" diagonal and 296x128 px resolution. SPI interface. Without PCB. Waveshare 2.9inch e-Paper (C)
Retired
No product available!
3-color e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. SPI interface. No PCB. Waveshare 2.13inch e-Paper (C)
Retired
No product available!
3-color e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. SPI interface. Without PCB. Waveshare 1.54inch e-Paper (C)
Retired
No product available!
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985