- Out-of-Stock
zł30.52
OIP100B - Isolated fibre optic probe for Micsig oscilloscopes
ID: 1184401
Insulated fibre-optic probe with a measurement range of up to 2500 V. Operates in a bandwidth of up to 100 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP100B
Description
Isolated fibre optic probe with a measurement range of up to 2500 V. It uses a standard BNC interface and can be connected to an oscilloscope or multimeter. It operates in the frequency band up to 100 MHz. The probe can operate with manual or automatic adjustment and is battery powered. It uses SigOFIT optical isolation technology, so it offers high accuracy and perfectly suppresses oscillations caused by high-frequency common noise. It will find applications in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig brand devices.
Features
- Bandwidth: 100 MHz
- Rise time: 3.5 ns
- Effective accuracy for 60 MHz bandwidth
- Output voltage: ±2.5V
- Measuring ranges:
- 1X: ±2.5V
- 10X: ±25V
- 20X: ±50V
- 500X: ±1250V
- 1000X: ±2500V
- Noise: <1.41mVrms
- Signal delay: ＜15.42 ns
- DC gain accuracy: 1%
- Common mode voltage range: 60kVpk
- Power supply: battery powered (DC 5 V charging, USB type C)
- Cable length: 2 m
1184401
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Portable oscilloscope for automotive applications with a 10.1" LCD display and touchscreen. It has four measurement channels and features good measurement performance: 100 MHz bandwidth, 1 GSa/s sampling rate and 110 Mpts memory buffer. Micsig ATO1004
zł3,889.56
Delivery date unknown
No product available!
Portable oscilloscope for automotive applications with a 10.1" LCD display and touchscreen. It offers four measurement channels and features good measurement performance: a bandwidth of 200 MHz, a sampling rate of 2 GSa/s and a memory buffer of 220 Mpts. Micsig ATO2004
zł5,535.00
Delivery date unknown
No product available!
Portable oscilloscope for automotive applications with a 10.1" LCD display and touchscreen. It offers four measurement channels and features good measurement performance: a bandwidth of 300 MHz, a sampling rate of 2 GSa/s and a memory buffer of 220 Mpts. Micsig ATO3004
zł6,493.71
24h
Available quantity: 1
Available
Other products in the same category (16)
With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. 6002-410-013
Retired
No product available!
KAmodEPAPER is a module with a clear and energy-saving EPD (e-Paper) display of the GDE035A3 series. Thanks to the derived control signals and integrated in the inverter module, the display control is simple and no additional power lines are required
Retired
No product available!
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
Retired
No product available!
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
Retired
No product available!
Shield for STM32 Nucleo with WiFi module b / g / n SPWF01SA. The module\'s firmware allows you to work as a client and UDP / TCP server, a web server, supports TCP / IP, TLS / SSL protocols. There are 16 GPIO lines available
Retired
No product available!
Shield X-NUCLEO-IHM09M1 from ST allows you to connect BLDC motor driver modules for STM32 Nucleo tiles
Retired
No product available!
STM32 Nucleo-144 development board with STM32F746ZGT6 MCU, supports Arduino, ST Zio and Morpho
Retired
No product available!
STM32 Nucleo-144 development board with STM32F429ZIT6 MCU, supports Arduino, ST Zio and Morpho
Retired
No product available!
The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4
Retired
No product available!
Gearmotor is a powerful 12V brushed DC motor with a 50:1 metal gearbox and an integrated quadrature encoder
Retired
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module. The module has a 2.54 mm goldpin connector. WRL-13774
Retired
No product available!
SBC computer with SoC Allwinner H8 (8-core Cortex-A7 2 GHz, PowerVR SGX544MP) equipped with: in 2 GB RAM memory, 8 GB eMMC memory, WiFi a / b / g / n, Bluetooth, SATA 2.0 interface
Retired
No product available!
No product available!
Mains power supply 5V, 1A, cable terminated with a mini-USB plug. DC / 230V AC
Retired
No product available!
The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks
Delivery date unknown
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module
Retired
No product available!
Insulated fibre-optic probe with a measurement range of up to 2500 V. Operates in a bandwidth of up to 100 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP100B