- Out-of-Stock
Junctek JDS6600-40 - Two-channel 40MHz DDS signal generator
ID: 1186029
5906623487868
A two-channel DDS signal generator with a range of up to 40MHz ensures precise signal generation thanks to DDS technology with an accuracy of 0.01uHz. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance, making it irreplaceable in electronics laboratories. Junctek JDS6600-40
Description
The two-channel DDS signal generator with a frequency range of up to 40MHz is an advanced device for electronics specialists. Using DDS technology, the generator guarantees stability and precision in generating signals. In the sine wave range, the device reaches up to 40MHz, while for square and triangular waves the range is up to 15MHz. Impulse and arbitrary waves can be generated with a frequency of up to 6MHz. The rise time for a square wave is only 20nS. With an accuracy of 0.01uHz and a stability of 1ppm/3h, this generator is one of the most accurate in its class. It offers 2048-point wavelength, 12-bit vertical resolution and 1mV amplitude resolution. All of these parameters are provided by a robust 50Ω output, making this an excellent tool for any electronics laboratory.
Features
- Sine wave frequency range: 0 - 40MHz
- Square wave frequency range: 0 - 15MHz
- Triangular wave frequency range: 0 - 15MHz
- Pulse wave frequency range: 0 - 6MHz
- Arbitrary wave frequency range: 0 - 6MHz
- Square wave rise time: 20nS
- Minimum frequency resolution: 0.01uHz
- Frequency accuracy: 20ppm
- Frequency stability: 1ppm/3h
- Wavelength: 2048 points
- Vertical waveform resolution: 12-bits
- Amplitude resolution: 1mV
- Output impedance: 50Ω
Included
- Two-channel generator
- BNC cable - crocodile clips - 2 pcs.
- BNC-BNC cable
- USB cable
- Power supply
1186029
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Cable with USB type A and lightning connectors, cable length 1.8m. Lanberg CA-USLM-
Retired
No product available!
Cable with USB type A and lightning connectors, cable length 3m. Lanberg CA-USLM-10CU-0030-WH
Retired
No product available!
Cable with USB type A and lightning connectors, cable length 3m. Lanberg CA-USLM-10CU-0030-BK
Retired
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3000mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Retired
No product available!
Processor charger designed for Li-Ion cylindrical batteries in various sizes (including 18650). It can charge batteries both with PCM protection and without protection. The nominal charging current in the main phase is 1A. XTAR MC1S
Retired
No product available!
Container for two 18650 batteries. It allows you to safely transport batteries and ensure their proper storage
Retired
No product available!
An extension module to support two cameras designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one connector of the minicomputer. ArduCAM B0195
Retired
No product available!
Scale module with aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has screw terminals. Can be used to make electronic scale. KAmodTENSOMETER2kg
Retired
No product available!
4x16 display with LED backlight negative blue. Equipped with HD44780 compatible controller. Artronic LCD-EC-1604A-BIW W/B-E6 C
Retired
No product available!
Development kit based on MediaTek MT7622 chip with 64-bit ARM Cortex-A53 dual-core processor. It is equipped with 1GB SDRAM, 8GB eMMC memory and numerous connectors and interfaces such as SATA, Ethernet, microSD socket and USB 3.0 Host. The kit creates a router that can run on various open source operating systems, including OpenWrt and Linux. Banana Pi BPI-R64
Retired
No product available!
The DDS generator with alphanumeric display allows you to generate sine, rectangular or triangle waveforms with a frequency of up to 5MHz. The device can also be used to measure frequencies in the 1Hz-60MHz range.
Retired
No product available!
Wireless mouse with a precise optical sensor. It has a button to change the resolution in three levels: 800/1200/1600 DPI. The set is equipped with a USB adapter, mouse range up to 10 m. Natec NMY-1189
Retired
No product available!
3.5" LCD display with touch screen, 480x320 pixel resolution. Controlled via SPI interface. ArduCAM U6111
Retired
No product available!
CR2016 lithium battery with 3V voltage and 90mAh capacity. Maxell CR2016
Retired
No product available!
CR2016 lithium battery with 3V voltage and 75mAh capacity. Tecxus CR2016
Retired
No product available!
CR2025 lithium battery with 3V voltage and 220mAh capacity. Maxell CR2025
Retired
No product available!
A two-channel DDS signal generator with a range of up to 40MHz ensures precise signal generation thanks to DDS technology with an accuracy of 0.01uHz. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance, making it irreplaceable in electronics laboratories. Junctek JDS6600-40