- Out-of-Stock
5.65" Seven-Color ePaper - 7-color e-Paper display 5.65" 600x448
ID: 1188509
5906623414994
7-color e-Paper display with a diagonal of 5.65" and a resolution of 600 x 448 pixels. It has a built-in controller that communicates via the SPI interface. Seeed Studio 104990859
Description
7-color e-Paper displays with a diagonal of 5.65" and a resolution of 600 × 448 px. The built-in controller performs communication via the SPI interface. E-Paper displays are characterized by high contrast of the displayed image and they only consume power when the displayed content is changed. It is compatible with 3.3V systems. Support is available on the product page in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 5.65"
- Resolution: 600 x 448 px
- Display color: 7-Color
- Interface: SPI
- Pixel size: 0.1915 × 0.1915
- Full refresh time: 15 seconds
- Power consumption: 76,2 mW
- Viewing angle:> 170 °
- No backlight, displays the last content after power off
- Low energy consumption
- Working voltage: 3.3V
- Display size: 114.9 x 85.8 mm
- Outline dimension: 125.4 x 99.5 mm
1188509
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 5.65
- Resolution
- 600 x 448 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
zł28.34
24h
Available quantity: 84
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
Regular pricezł21.70zł20.31
24h
Available quantity: 19
Available
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth (BLE) 5.0 communication. Seeed Studio 102010448
zł56.43
24h
Available quantity: 14
Available
An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172
zł24.53
24h
Available quantity: 5
Available
Other products in the same category (16)
HK 8x4.5 SF Props 4pc Standard Rotation (Yellow) (22311)
Retired
No product available!
Male terminal block, angled, 20-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
Retired
No product available!
8x2 Character OLED Display, 58x32, Negative Black Surface, Yellow Dot, 5V, RoHS
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Pin strip straight in black, single-row, female, 1x6, pitch 2.54mm, THT, RoHS. PB16S
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L YELLOW
Retired
No product available!
Aluminum extensometer beam, allowing measurement of weight up to 20 kilograms. It has four wires. It is used in kitchen scales and portable scales, max. 20 kg, dimensions: 80x7x7 mm, has a 21 cm cable. Tensom20kg02
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
7-color e-Paper display with a diagonal of 5.65" and a resolution of 600 x 448 pixels. It has a built-in controller that communicates via the SPI interface. Seeed Studio 104990859