- Out-of-Stock
AVT1465 A
ID: 190421
SAFE HALOGEN LIGHT SWITCH - PLATE
SAFE HALOGEN LIGHT SWITCH - PLATE
Producer: AVT
Halogen bulbs are relatively easy to destroy when switched on, because they then draw a very high current (even several times greater than the rated one). This causes the filament to burn out and the entire element has to be replaced. This situation can be avoided by using the presented set. Its operation consists in a short-term limitation of the current flowing into the halogen at the moment of its switching on. As an executive element, high power MOSFET is used. Because the system works very briefly, the power lost in the transistor is relatively small so that the element does not need a heat sink. The whole switch is assembled on a small plate and easily fits directly next to the halogen bulb holder.
The device is especially recommended for all users of halogen lighting
Selected parameters:
- for halogen lamps for 6 and 12V voltage
- maximum power of the protected 50 W bulb (depending on the elements used)
- no heat sink
- power supply - 6-12V
- dimensions of the plate 23x22mm
- printed circuit board and documentation included
A version with a set of components for self-assembly is available
Detailed description in EP 5/08
Download
190421
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
No product available!
Breakout for LinkIt Smart 7688 v2.0 is a new version of the base board for the IoT LinkIt Smart 7688 module. Ethernet socket, USB Host socket, 3 Grove standard connectors (2 UART interfaces, I2C interface). Seeed Studio 103100022
Retired
No product available!
No product available!
Micro SDHC 16GB class 10 UHS-I memory card with adapter
Retired
No product available!
No product available!
RoboClaw 2x45A Motor Controller (V5D) is a two-channel DC motor driver, operating voltage: 6-34V, maximum continuous current: 45A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3287
Retired
No product available!
The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC or analog inputs. This version can supply a continuous 15 A per channel (30 A peak) and operates up to 34 V.
Retired
No product available!
The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. This version can supply a continuous 30 A per channel (60 A peak) and operates up to 34 V.
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L YELLOW
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L YELLOW
Retired
No product available!
Pin strip straight in red, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L RED
Retired
No product available!
Adjustable USB load displaying voltage and current consumption of connected devices. The load can draw current up to 3 A. The voltage is measured in the range 3.5 ... 21V, current 0 ... 4A. It is also possible to measure cell capacity
Retired
No product available!
No product available!
Printed circuit board and programmed layout for building a comfortable direction indicator module. AVT1945 A +
Retired
No product available!
AVT kit for self-assembly of the comfortable direction indicator module. AVT1945 B
Retired
No product available!
SAFE HALOGEN LIGHT SWITCH - PLATE