- Out-of-Stock
AVT2270 C
ID: 190560
MILLIOLOMETER MODULES FOR POWER SUPPLY - SET ASSEMBLED AND STARTED
MILLIOLOMETER MODULES FOR POWER SUPPLY - SET ASSEMBLED AND STARTED
Producer: AVT
The voltmeter module was designed as a cheap element of a large laboratory power supply. The measuring range 0-99.9 V ideally 'fits' the direct control of the output voltage.
The popular ICL7107 chip was used as the ac converter. In its structure it contains all the elements needed to make a panel meter - an analog part including decoders and buffers controlling LED displays. ICL7660 is also on the board. This is a negative voltage converter circuit (necessary for ICL 7107). Thanks to this, the entire kit can be powered from one positive voltage.
The tile has small dimensions and has been designed universally; exchanging or adding individual elements, you can easily change the measuring range or use the current measurement module.
The device is recommended especially for designers of measuring equipment, for electronic and service rooms
Selected parameters:
- voltage measurement in the range of 0-99.9 V
- the ability to measure voltages in the range 0-0.999 V
- possibility of using the current measurement module
- readout field - three seven-segment LED displays
- one power supply
- power supply - 5 V
- reassembled system
- Detailed description in
Download
190560
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Polyester braid for organizing numerous cables into bundles. Z28416
Retired
No product available!
AVT kit for self-assembly LED ring illuminator. AVT1918 B
Retired
No product available!
No product available!
Brushless motor D3542 / 4 1450 kV type Outrunner Turnigy (HK18230)
Retired
No product available!
A set for building a four-wheel, remote-controlled vehicle. Equipped with a programmable Arduino Uno R3 controller and set of sensors. modARD_02
Retired
No product available!
Grapic LCD 128x64, LED backlight (yellow-green), enhanced temperature range, PCB 75x52.8mm, RoHS
Retired
No product available!
The Step-Down D24V3ALV Buck Voltage Regulator module with adjustable output voltage in the range of 2.5-7.5V with a wide input voltage range of 4.5-42V and a maximum output current of 300 mA. Pololu 2101
Retired
No product available!
Minicomputer with 4-core Allwinner V40 ARM Cortex-A7 processor, Mali 400 MP2 GPU graphics card, 1 GB RAM, WiFi, BT 4.0 and numerous connectors. Banana Pi BPI-M2 Berry
Retired
No product available!
AC/DC power adapter with a power of 180 W and an output voltage of 19.5 V. It is equipped with an output with an XT60 plug and is designed for universal chargers with an XT60 connector, e.g. ToolkitRC M6. ToolkitRC ADP180
Retired
No product available!
Pre-assembled precision timer 1 second-99 minutes. AVT1995 C
Retired
No product available!
No product available!
NUN10 is a workshop organizer made of high quality plastic, transparent, closed with latches, with a solid handle for convenient transportation. It has 5 compartments
Retired
No product available!
No product available!
NVIDIA development kit with the Tegra X2 SoC chip containing two Denver cores, four 64-bit ARM Cortex A57 cores and a Pascal graphic layout consisting of 256 cores supporting CUDA technology. Jetson TX2 Development Kit
Retired
No product available!
Odroid-MC1 Solo is a minicomputer with an Samsung Exynos5422 processor (ARM® Cortex ™ -A15 Quad 2.0GHz / Cortex ™ -A7 Quad 1.4GHz) which has 2 GB of RAM (LPDDR3) available. The module is dedicated to the construction of computer clusters, has a housing that allows you to connect multiple modules with each other.
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Gray
Retired
No product available!
MILLIOLOMETER MODULES FOR POWER SUPPLY - SET ASSEMBLED AND STARTED