- Out-of-Stock
![AVT2445 DK AVT2445 DK](https://kamami.pl/6137-large_default/avt2445-dk.jpg)
The system allows control of any peripheral devices using the parallel port of any PC. The project consists of two parts: an executive module attached to the printer port and software (two programs).
The executive module is a small board that provides control over four devices. The adopted solution allows further expansion - you can easily attach another module by increasing the number of controlled devices to eight !!! As actuators in the system, triacs or relays can be used. First, they are perfect for controlling bulbs. The relays work only at low switching frequencies, but are suitable for switching large currents. They are perfect as controllers for motors, pumps or electric valves - wherever there is inductance.
The device is especially recommended for anyone who wants to use a PC computer to control external devices, eg a system of window blinds
Selected parameters:
Download
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Graphic display 128x64 with LED backlight yellow / green, 93x70mm, extended temperature range
No product available!
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
No product available!
ROSA3D filament made of high-quality PET-G granules with a small addition of carbon fibers. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G CarbonLook
No product available!
No product available!
No product available!
LPY550AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą500°/s and ą2000°/s Ranges
No product available!
No product available!
No product available!
No product available!