AVT2917 / 1 A

The presented device will be used wherever the device (passive) is required for a short time or for a moment after its switching off.
an example of this can be the lighting control of the corridor, in which there is a switch at one of the ends. By
this driver will be able to keep the light switching on condition after switching the switch to the off position and smoothly reaching its end, in addition, we can highlight the switch to make it easier to find it in the dark.
Device application:

• Temporary turning on the receiver after switching it on or off with the switch. Controlling fans, halogen bulbs in this way.
• Temporary inclusion of lighting / ventilation.
• Maintaining the state of lighting / ventilation switching on after switching it off with the switch.
• Opportunity to work in garages, corridors, bathrooms, staircases.

Selected parameters:

• Work with a resistive load, i.e. classic, halogen lamps, heaters, etc., as well as low power asynchronous motors.
• The receiver can be controlled up to 100W.
• The presence of the connector, enabling the inclusion of LEDs illuminating the switch.
• Easy assembly in the switch box; no additional power is required.
• diameter of the 50mm plate

The printed circuit board and documentation are included.

A set containing a printed circuit board and documentation / 2 is available

Detailed description EdW 10/09

NOTE: Kit AVT2917 is available in two versions:

• / 2 (version with relay)
• AVT2917 / 2 B (Triac version)