- Out-of-Stock
AVT5261 A
ID: 190461
TELEMETRIC EQUIPMENT WITH GSM MODULE - PRINTED PLATE
TELEMETRIC EQUIPMENT WITH GSM MODULE - PRINTED PLATE
Producer: AVT
Thanks to the widespread availability and low prices of GSM and GPS modules, it became possible to construct a compact telemetric system by themselves. We present a description of the device that can be used in locating vehicles, but also in remote monitoring and control systems for alarm devices.
The control microcontroller supervises the processing of data received from the CAN and RS485 buses and then sending them to the server using the TCP / IP protocol. The transmission is bi-directional - in the opposite direction the operator can remotely control four independent, two-state outputs and also return data to the RS485 interface.
The device is especially recommended for vehicle monitoring, object protection and industrial automation
Selected parameters:
- four digital inputs, two analog inputs, four OC outputs
- built-in GPS and GSM / GPRS modules
- device control - a microprocessor with an ARM7 core
- RS485 and CAN interfaces
- data transmission using the TCP / IP protocol
- settings: via USB or remotely (TCP / IP)
- power supply - 6-27Vdc
- printed circuit board and documentation included
- A detailed description in EP 10/10
Download
190461
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. 6002-410-013
Retired
No product available!
KAmodEPAPER is a module with a clear and energy-saving EPD (e-Paper) display of the GDE035A3 series. Thanks to the derived control signals and integrated in the inverter module, the display control is simple and no additional power lines are required
Retired
No product available!
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
Retired
No product available!
Shield for STM32 Nucleo with WiFi module b / g / n SPWF01SA. The module\'s firmware allows you to work as a client and UDP / TCP server, a web server, supports TCP / IP, TLS / SSL protocols. There are 16 GPIO lines available
Retired
No product available!
Shield X-NUCLEO-IHM09M1 from ST allows you to connect BLDC motor driver modules for STM32 Nucleo tiles
Retired
No product available!
STM32 Nucleo-144 development board with STM32F746ZGT6 MCU, supports Arduino, ST Zio and Morpho
Retired
No product available!
STM32 Nucleo-144 development board with STM32F429ZIT6 MCU, supports Arduino, ST Zio and Morpho
Retired
No product available!
The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4
Retired
No product available!
Gearmotor is a powerful 12V brushed DC motor with a 50:1 metal gearbox and an integrated quadrature encoder
Retired
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module. The module has a 2.54 mm goldpin connector. WRL-13774
Retired
No product available!
SBC computer with SoC Allwinner H8 (8-core Cortex-A7 2 GHz, PowerVR SGX544MP) equipped with: in 2 GB RAM memory, 8 GB eMMC memory, WiFi a / b / g / n, Bluetooth, SATA 2.0 interface
Retired
No product available!
No product available!
Mains power supply 5V, 1A, cable terminated with a mini-USB plug. DC / 230V AC
Retired
No product available!
The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks
Delivery date unknown
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module
Retired
No product available!
The RoboClaw motor controllers from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak).
Retired
No product available!
TELEMETRIC EQUIPMENT WITH GSM MODULE - PRINTED PLATE