- Out-of-Stock
NGX Technologies NGX ARM USB JTAG
ID: 187877
NGX ARM USB JTAG
NGX ARM USB JTAG
Features:
- USB 2.0 Full Speed device (12 Mbits/sec) interface
- Can be used to debug and program all ARM processors supported by OpenOCD
- Provides a standard 2X10 pin JTAG interface
- Adds a virtual RS232 serial port to your computer or laptop
- No external power supply required - it runs off of the USB power from the host computer
- Complete schematic provided
- Supported by open source debugger OpenOCD and commercial tools like Crossworks
The 'NGX ARM USB JTAG' is a compact USB to JTAG in-circuit debugger and programmer designed for ARM cores.It connects via USB to the host PC. The 'NGX ARM USB JTAG' provides a standard 20-pin JTAG interface as well as a standard RS232 port.
It is based on FTDI's popular FT2232 Dual USB UART/FIFO integrated circuit. The FT2232 has two devices integrated on it:
- Channel A: USB to JTAG interface
- Channel B: USB to SERIAL UART
JTAG Interface
It provides a standard ARM-compatible 20-pin JTAG interface. The JTAG interface enables access to the onchip debug module which is integrated into the ARM CPU. The debug module enables a programmer to debug the software on an embedded target system.
Serial UART
NGX ARM USB JTAG' serial port provides you with an independent functional "USB to RS-232" serial device. For Linux, the RS232 driver for the FT2232 is part of the main kernel tree and is provided in most standard Linux distributions. In Windows, you have to load the Windows driver for the FT2232. Once the driver is loaded, Windows will assign a virtual COM port to the serial port. It operates just like a standard COM port. You can use it on laptops or PC's that do not have a 9-pin legacy serial connector.
187877
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Available
Available
Available
No product available!
JTAG interface galvanic separator that protects equipment against damage caused by potential differences, with a maximum clock frequency of 110 MHz, 3-5 V power supply, and isolation voltage up to 1 kVDC, equipped with multiple connectors and optical status signaling
zł399.00
24h
Available quantity: 38
Available
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
zł10.46
24h
Available quantity: 17
Available
Other products in the same category (16)
A module with Acconeer sensor A111. A111 is a one-chip radar (PCR) solution complete with antennas and SPI interface up to 50 MHz. SparkFun Pulsed Radar Breakout A111
Retired
No product available!
No product available!
A set containing a 8GB microSD card with a PYNQ image (for PYNQ-Z1) with an adapter. Digilent 240-075-1
Retired
No product available!
The DC motor driver allows you to control a motor with a voltage in the range of 6 to 28V, the motor can draw up to 60A. Controlled by PWM modeling, it can be used in robotics, small electric vehicles. Digilent 410-334-2
Retired
No product available!
Adapter with screw terminals for use with the OpenLogger data logger. Provides access to screw terminals to 8 analog inputs, 8 digital I/O, wave generator and power pins. Digilent 410-388
Retired
No product available!
Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 32MBit (4MB)
Retired
No product available!
The Analog Training Board evaluation and training kit for designers interested in modern analog components from the Analog Devices offer
Retired
No product available!
Odroid N2 4 GB CoreELEC Edition is a ready-made kit that allows you to build a home entertainment center (media center), based on the ODROID N2 minicomputer with 4 GB of RAM.
Retired
No product available!
Industrial microSD UHS-1 memory card with a capacity of 8GB for ODROID N2 with pre-loaded Linux software.
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a minimum capacity of 2500mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-3HCDE/4LE
Retired
No product available!
Panasonic Eneloop PRO R03/AAA rechargeable batteries with a minimum capacity of 930mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-4HCDE/4LE
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a capacity of 2000mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-3MCCE/4LE
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a capacity of 2000mAh and a voltage of 1.2V. The set contains eight pieces sold in a reusable packaging. Panasonic BK-3MCCE/8LE
Retired
No product available!
Panasonic Eneloop R03/AAA rechargeable batteries with a capacity of 800mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-4MCCE/4LE
Retired
No product available!
Panasonic Eneloop R03/AAA rechargeable batteries with a capacity of 800mAh and a voltage of 1.2V. The set contains eight pieces sold in a reusable packaging. Panasonic BK-4MCCE/8LE
Retired
No product available!
Universal Panasonic Eneloop R6/AA and R03/AAA battery box in blue. Panasonic BQ-CASEL/1E
Retired
No product available!
NGX ARM USB JTAG