- Out-of-Stock
AVT2738 A
ID: 193969
STABIL-RECHARGE BATTERY CHARGER NICD / NIMH - PRINTED PLATE
STABIL-RECHARGE BATTERY CHARGER NICD / NIMH - PRINTED PLATE
Producer: AVT
The device provides a constant battery charging current, regardless of the level of their discharge and the time of charging. This ensures a significant extension of the life of these elements.
The charger is designed to work with the most popular NiCd and NiMH batteries . The device is powered directly from the network. Thanks to the built-in transformer, galvanic separation, a wide range of charging currents (selected) and voltage allowing to charge simultaneously a packet of several batteries were guaranteed. There are no automation elements in the system, it was assumed that the system will work in the so-called system recommended by producers. ten-hour charging (current = 1/10 capacity). In practice, this means that the set of batteries will be charged within approx. 15 hours (this is due to their 70% efficiency).
The device is especially recommended for users of NiCd and NiMH batteries
Selected parameters:
- charging current - up to 0.9 A
- charging in the 1/10 system of capacity
- simultaneous charging up to ten batteries
- charging indication - LED
- power supply - 230 V
- printed circuit board and documentation included
- Detailed description in EdW 12/04
Download
193969
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
The assembled resistance welding machine controller. AVT5553 C
Retired
No product available!
No product available!
AVT kit for self-assembly of the PSK mini-receiver. AVT3168 B
Retired
No product available!
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482
Retired
No product available!
Trenz TE0808-04-09EG-1EA is a module containing the Xilinx Zynq Ultrascale + MPSoC (XCZU9EG-1FFVC900E) system, 2 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and pulse converters for all internal voltages power. Trenz TE0808-04-09EG-1EA
Retired
No product available!
Trenz TE0808-04-09EG-2IA is a module containing the Xilinx Zynq Ultrascale + MPSoC system, 4 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and impulse converters for all internal supply voltages. TE0808-04-09EG-2IB
Retired
No product available!
Miniaturized adaptation Arduino/Genuino 101 board, perfect for wearable and IoT applications, equipped with many of the same features as the 101 line with Bluetooth Low Energy (BLE) capabilities; with 6-axis accelerometer/gyroscope; can be programmed using either the Arduino IDE or Intel Curie Open Developer Kit (CODK). DEV-14281
Retired
No product available!
No product available!
Printed circuit board for triac module. AVT1965 A
Retired
No product available!
AVT set for a stand-alone executive module with triac. AVT1965 B
Retired
No product available!
Assembled executive module with triac. AVT1965 C
Retired
No product available!
Velleman VTV3 mini mini vise in red with a suction cup
Retired
No product available!
No product available!
EXTREME heat shrink tubing for electrical and mechanical insulation, diameter against shrinkage 5.0 mm; diameter after shrinkage 1.5 mm, a set of 10 pieces with a length of 1 meter
Retired
No product available!
The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project! With a default voltage range of 5–28VDC, power can be connected to this shield in one of two ways. DEV-14155
Retired
No product available!
No product available!
STABIL-RECHARGE BATTERY CHARGER NICD / NIMH - PRINTED PLATE