- Out-of-Stock
M24LR-DISCOVERY - development kit with CR95HF reader and M24LR04E NFC/RFID tag
ID: 198117
Development kit containing the M24LR04E-R EEPROM chip. It consists of two ready-to-use boards that can communicate with each other via the I2C or RFID bus.
Description
M24LR-DISCOVERY is a ready-to-use kit that features the M24LR04E-R Dual Interface EEPROM IC. It addresses a lot of applications such as industrial and medical equipment. This kit contains 2 different boards (see Figure 1):
- The M24LR board is battery-less and is powered by RFID readers or NFC-enabled phones supporting ISO / IEC 15693.
- The RF transceiver board is an RFID reader demonstration board, and a CR95HF (13.56 MHz multi-protocol contactless transceiver IC with SPI and UART serial access). This board has to be plugged in to PC and comes with a demonstration software.
The M24LR board also works with Android NFC phones supporting ISO / IEC 15693. An application called NfcV-Reader is available on Google Play. Performance may vary on NFC phone's RF management.
Features
M24LR board
- M24LR04E-RMN6T / 2 Dual Interface EEPROM with I2C and ISO / IEC 15693 RF interfaces, 4 Kbits of EEPROM and password protection in SO8N package
- STM8L152C6T6 8-bit microcontroller, with 8 Kbytes of Flash memory
- STTS751-0WB3F, low-voltage digital temperature sensor
- 20 x 40 mm inductive antenna etched on the PCB
- Two function buttons (User and Reset)
- SWIM connector for programming and debugging
- I2C connectors
- LCD (24 segments, 4 commons)
RF transceiver board
- CR95HF-VMD5T 13.56MHz multi-protocol contactless transceiver IC with SPI and UART serial access
- STM32F103CB 32-bit microcontroller, with 128 Kbytes of Flash memory
- 47 x 34 mm 13.56 MHz inductive antenna etched on PCB and associated circuitry
- USB interface for communication with PC host and demonstration board powering
Dual-port EEPROM memory - demonstration of the M24LR-Discovery capabilities
198117
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
zł28.91
24h
Available quantity: 206
Available
Other products in the same category (16)
Assembled power amp with LCD display. AVT3218 C
Retired
No product available!
RGB LED 32 x 32 display module (1024 LEDs). Refresh rate 1: 8. It has two IDC connectors, which allows you to connect multiple displays in series. SparkFun SPX-14633
Retired
No product available!
TFMini is a small laser rangefinder with a measuring range of 0.3 to 12 meters. The measurement resolution is 5 mm. ToF technology (Time of Flight) is used for measurement. Communication with the sensor takes place via the UART interface. SparkFun SEN-14588
Retired
No product available!
GraspIO Cloudio is HAT for use with Raspberry Pi. It allows creating many interesting IoT projects. It is based on the ATmega 32U4 microcontroller. It has an OLED display, an IR receiver, a light sensor, a temperature sensor, an RGB LED and a buzzer. CLOUDIO-SMRTDEV-R-V1
Retired
No product available!
No product available!
BleBox AirSensor is an air quality sensor informing about the presence of harmful dust (PM1, PM2,5, PM10) suspended in the home and outside.
Retired
No product available!
SparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
Retired
No product available!
SparkFun Papa Soundie Audio Player is a board with ATmega328P microcontroller and VS1000D chip, which allows you to play sounds (in OGG Vorbix and WAV format) stored on a microSD memory card. The board has a 3.5 mm jack connector. SparkFun DEV-14554
Retired
No product available!
No product available!
Printed circuit board and programmed solar collector differential controller. AVT5621 A +
Retired
No product available!
AVT kit for self-assembly of the solar collector differential controller. AVT5621 B
Retired
No product available!
Assembled solar collector differential controller. AVT5621 C
Retired
No product available!
Printed circuit board and programmed countdown timer system. AVT5622 A +
Retired
No product available!
AVT set for self-assembly of the countdown clock. AVT5622 B
Retired
No product available!
No product available!
Printed circuit board and programmed layout for the Arduino learning board. AVT5636 A +
Retired
No product available!
Development kit containing the M24LR04E-R EEPROM chip. It consists of two ready-to-use boards that can communicate with each other via the I2C or RFID bus.