- Out-of-Stock

Servomechanism MG90, metal gear, TowerPro, RoHS
Servo MG90
Servomechanism MG90, metal gear, TowerPro, RoHS
The TowerPro MG-90 servo is the "metal" equivalent of the well-known and extremely popular SG-90 servo and its successors - SG-91R. It is characterized by precise work, higher than in the case of servos with traditional torque modes and extremely low, as for servo with metal gears - only 14 g! In addition, the MG-90 servo is equipped with a precision bearing, thanks to which the servo speed has also increased by an additional 20% from 0.14 sec. up to 0.11 sec at 4.8 V, and all this with the dimensions of a typical "nine" - just 23 x 12.2 x 29 mm!
We recommend it wherever it is necessary to use a bit more power for standard applications, or whenever the servo is more likely than not to be exposed to possible "injuries" due to its location. It successfully replaces much more expensive and somewhat "worn-out" servos such as Hitec HS-82 MG or HS-81, offering similar power properties at a more compact size and lower weight. Perfect for ailerons for acrobats, glider rudders, as a throttle servo in combustion models or even for small cars in 1:16 and 1:18 scale. The MG-90 servo is thus a very successful conversion of slightly larger and heavier servos with metal modes to perfectly match the small "micro" class servo models.
Features:
No product available!
No product available!
Minicomputer with an octa-core processor (up to 1.4GHz) and 2 GB of DDR3 RAM memory, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T3
No product available!
PCB for remote two-channel PILOT switch. AVT5422 / 1 A
No product available!
No product available!
A miniature linear actuator that has a stroke range of up to 100 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
No product available!
The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+
No product available!
Programmable, linear laboratory power supply with adjustable supply voltage up to 30V and current up to 5A. The power supply has two 30V/5A output channels and one 5V/3A channel. Equipped with a USB and RS-232 interface. Uni-T UTP3305C
No product available!
Dagu Rover 5 Tracked Chassis with Encoders
No product available!
Energizer Industrial alkaline battery (R6, LR06, large) 1 piece, 1.5V, 2700mAh capacity. Weight 23g
No product available!
Kit with 16 modules and the IO Expansion Shield designed to work with the Arduino Uno. Dedicated to learning programming and electronics
No product available!
Motion MEMS and environmental sensor expansion board for STM32 Nucleo, equipped with Arduino UNO R3 connector layout; designed around the LSM6DSL 3D accelerometer and 3D gyroscope, the LSM303AGR 3D accelerometer and 3D magnetometer, the HTS221 humidity and temperature sensor and the LPS22HB pressure sensor. The board interfaces with the STM32 microcontroller via the I²C pin
No product available!
No product available!
No product available!
Printed circuit board with Lock code lock programmed. AVT5601 A +
No product available!
AVT kit for self-assembly of a microprocessor-based bird scare. AVT3135 B
No product available!
Servomechanism MG90, metal gear, TowerPro, RoHS