- Out-of-Stock
ODROID X2
ID: 205178
ODROID-X2 open development platform based on Exynos4412 Prime 1.7GHz ARM Cortex-A9 Quad Core with 2GB memory
ODROID-X2 open development platform based on Exynos4412 Prime 1.7GHz ARM Cortex-A9 Quad Core with 2GB memory
Features:
- Processor: Samsung Exynos4412 Cortex-A9 Quad Core 1.7Ghz with 1MB L2 cache
- Memory: 2GB LP-DDR2 880Mega data rate
- 3D Accelerator: Mali-400 Quad Core 440MHz
- Video: supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
- Video Out: micro HDMI connector / RGB-24bit LCD interface port
- Audio: Standard 3.5mm headphone jack and microphone jack, HDMI Digital
- LAN: 10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
- USB2.0 Host: High speed standard A type connector x 6 ports
- USB2.0 Device: ADB/Mass storage(Micro USB)
- UART: System console monitoring for development (1.8volt interface)
- IO PORTs: 50pin IO expansion port for LCD/I2C/UART/SPI/ADC/GPIO interfaces
- Storage: Full size SDHC Card Slot, eMMC module socket (not included)
- Camera: MIPI-CAM connector (MIPI-CSI 2 lanes) (not included)
- Power: 5V 2A Power (not included)
- System Software: u-boot 2010.12, Kernel 3.0.15, Android4.0.x(ICS)
- Size: 90 x 94 mm
Package contents:
- Odroid-X2 boards
- Power supply
205178
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
USB IO board for Odroid computers, compatible with XU4, C1 +, C1, C0, C2 versions
Regular pricezł74.03zł49.89
24h
Available quantity: 2
Available
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
zł78.61
24h
Available quantity: 4
Available
The cable allows for transmitting image and sound from micro HDMI devices to HDMI screens, offering high transmission quality thanks to HDMI 1.4 technology and is 1.5 m long. Akyga AK-HD-15R
zł13.64
24h
Available quantity: 26
Available
Other products in the same category (16)
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
No product available!
Basys™3 Artix-7 FPGA Board with locked version of Vivado Design Edition
Retired
No product available!
LCD 2x20, 116x37mm, FSTN NEGATIVE, LED backlight (white), enhanced temperature range, RoHS
Retired
No product available!
AVR Raven board with 2.4 GHz transceiver, on board picoPower AVR application processors and LCD display
Delivery date unknown
No product available!
No product available!
Module with an analog temperature and humidity sensor based on the SHT10 system. It is characterized by high reliability and stability with low energy consumption. It is compatible with 3.3V and 5V controllers. DFRobot DFR0066
Retired
No product available!
No product available!
No product available!
Do you fly in your dreams? Do you like the feeling? Once again Ugears makes the dream come true reaching out to the sky with its first ever aircraft model represented by two flying machines in one package. Introducing – The Aviator model.
The model has three modules: the airplane, the helicopter and the flight control tower. Choose between your aircraft, set one on the tower’s bar and you are good to fly. As a beginner pilot you might want to start with the helicopter which is not as difficult to control as the airplane. Easier to manipulate but no less exciting, your chopper has a cockpit with doors that open and shut, and three-blade main and tail rotors. UGears 70053
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
ODROID-X2 open development platform based on Exynos4412 Prime 1.7GHz ARM Cortex-A9 Quad Core with 2GB memory