- Out-of-Stock
OP4EB-AdeunisMP868
ID: 207612
Hardware extension adds 863 to 870 MHz radio communication capability to Open4, EvoPrimer and STM32 Primer2 platforms
Adeunis TWIMO 863 to 870 MHz Extension is a hardware/firmware extension pack designed to add additional radio frequency evaluation features to the Open4 primers, EvoPrimers or STM32 Primer2 evaluation and development platforms.
By adding Adeunis TWIMO 863 to 870 MHz Extension board and Adeunis firmware application, users can immediately evaluate and test wireless communications in their STM32 microcontroller applications. TWIMO specific test modes include:
- TX/RX mode for frame transmission/reception
- Received level mode for transmission testng between two products with Adeunis modules. Test RSSI level and count transmitted/received frames
- Scanner mode for testing traffic levels on a selected frequency (ideal for on-site implementation tests)
Adeunis firmware is based on CircleOS and functions directly on STM32F103VG and STM32F103VE equipped Open4, EvoPrimer and STM32 Primer2 platforms.
The extension pack includes:
- One extension board with Adeunis TWIMO module
- One antenna
- User's guide
Adeunis Downloads & Doc for this product:
- Firmware - ARF_SK_OPEN4_FIRMWARE_UPDATE
- User guide - ARF_TWIMO_SK_OPEN4_USER_GUIDE
207612
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Digital signal generator with two output channels. It supports waveform types such as sine wave, rectangular signal, triangular signal, sawtooth signal, ECG and random noise. Fnirsi DDS
Retired
No product available!
Direct type extruder designed for 3D printers, including but not limited to the Ender 3. It has high quality gears and an LDO motor to ensure the filament is moved with confidence and precision. Mellow NF-sunrise v1.1
Retired
No product available!
Bowden type extruder designed for 3D printers including the Ender 3 and Creality CR10, among others. It has high quality gears to ensure the filament is moved with confidence and precision. Trianglelab RNC Nano
Retired
No product available!
Miniature vacuum pump powered by 12 V. Generates a vacuum that can be used, for example, in robotics
Retired
No product available!
A panel meter for measuring voltage, current and power in electrical systems. It is equipped with an LCD display. It has a wide voltage measurement range of 0 to 100 V and a current measurement range of 0 to 10 A
Retired
No product available!
Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1.0
Retired
No product available!
A mobile robot chassis equipped with four-wheel drive. The shock absorber-based design absorbs shocks and vibrations, and the modular design allows for easy development of the project. Ideal for building your first mobile robot. Waveshare Robot-Chassis-NP
Retired
No product available!
A mobile robot chassis equipped with Mecanum four-wheel drive. The shock absorber-based design absorbs shocks and vibrations, and the modular design allows for easy development of the project. Ideal for building your first mobile robot. Waveshare Robot-Chassis-MP
Retired
No product available!
A set of POD modules dedicated to the Raspberry Pi Zero and Zero 2W. Includes Zero POD Case, USB and HDMI expander module, LAN expander and display. Waveshare Zero POD KIT C
Retired
No product available!
A set of POD modules dedicated to the Raspberry Pi Zero and Zero 2W. Includes Zero POD Case, USB and HDMI expander module and display module. Waveshare Zero POD KIT B
Retired
No product available!
A set of POD modules dedicated to the Raspberry Pi Zero and Zero 2W. Includes Zero POD Case, USB and HDMI expander module and LAN expander. Waveshare Zero POD KIT A
Retired
No product available!
POD module kit dedicated for Raspberry Pi Zero and Zero 2W Includes Zero POD Case and USB and HDMI expander module. Waveshare Zero POD HDMI USB HUB Module KIT
Retired
No product available!
Touch panel display module dedicated to the Raspberry Pi Zero and Zero 2W. It uses a 2.8" screen with a resolution of 240 x 320 px. Can be used in conjunction with other POD modules. Waveshare POD 2.8inch Resistive Touch Display Module
Retired
No product available!
Modular USB and HDMI expander dedicated to the Raspberry Pi Zero and Zero 2W. It consists of three parts and has contact holes for easy integration with other POD modules. Waveshare Zero POD HDMI USB Hub Module
Retired
No product available!
Modular enclosure dedicated to the Raspberry Pi Zero and Zero 2W. It consists of three parts and has contact holes for easy integration with other POD modules. Waveshare Zero POD Case
Retired
No product available!
Development board with NXP iMX RT1011 processor with ARM Cortex M7 core equipped with AirLift WiFi module. It has Arduino UNO compatible connectors and a STEMMA QT connector for I2C devices. Adafruit 4950
Retired
No product available!
Hardware extension adds 863 to 870 MHz radio communication capability to Open4, EvoPrimer and STM32 Primer2 platforms