- Out-of-Stock
Pololu 2148 - Power HD Low-Profile Digital Servo 1207TG
ID: 210517
Power HD Low-Profile Digital Servo 1207TG
Power HD Low-Profile Digital Servo 1207TG
The 1207TG is a premium servo from Power HD with a standard-size footprint but a very low height, resulting in a unique low profile that reduces weight and allows use in applications with tight space constraints. It has a coreless motor with an all-metal gear train, digital control electronics, and two ball bearings on the output shaft. Servo horns and associated hardware are included.
Key specs at 6 V: 0.09 sec/60°, 110 oz-in (8 kg-cm ), 48 g.
 |
Overview
The HD-1207TG is a premium servo that is set apart by its unique, low-profile shape. Despite its reduced size and weight, the 1207TG offers the kind of performance usually only found in heavier standard-size servos, which makes it great for applications with tight space or weight constraints. The picture on the right shows how the 1207TG compares to our popular 1501MG standard-size servo.
Digital electronics combined with a coreless motor, titanium-shielded aluminum gears, and two ball bearings give this servo a distinct edge over typical standard-size servos. The 1207TG works with standard RC pulses at frequencies up to 333 Hz. The 12" (300 mm) lead is terminated with a standard â€sJRâ€t-style connector, which is Futaba-compatible. The picture below shows an example of the hardware that might be included with this servo (hardware might vary).
 |
The pictures below show the all-metal (copper and aluminum) gear train and ball bearings.
 |
| Copper and aluminum gears and ball bearings of the Power HD digital servo 1207TG. |
|---|
You can find more information about this servo under the specifications tab and in its datasheet (364k pdf).
Note that, as with most hobby servos, stalling or back-driving this servo can strip its gears.
210517
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
2500 mW laser head designed for installation in a CNC machine. It allows you to engrave in materials such as wood, plastics, paper or thin leather. CNClaser2500mW
Retired
No product available!
5 V DC electromagnet with a holding force of 3 kg and a power of 1 W. It can be used to build a DIY electromagnetic lock, smart cabinet or door. DFRobot DFR0794
Retired
No product available!
A LiDAR camera with a small size and a resolution of 2 MP equipped with an IMU unit. It enables very accurate depth detection. Range up to 9 meters. Intel RealSense LiDAR Camera L515
Retired
No product available!
An expansion board (HAT) with a Sipeed module designed to run artificial intelligence (AIoT) in cooperation with a Raspberry Pi. Seeed Studio 102991187
Retired
No product available!
Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Black
Retired
No product available!
Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Blue
Retired
No product available!
Kit for building an electronic laboratory based on the TotemDuino board and the LabBoard extension module. It is a great platform for experimenting, learning electronics and programming Arduino. Totem TKM-ML1
Retired
No product available!
The MIMXRT1176DVMAA dual-core evaluation kit that runs up to 1 GHz has 512 Mb SDRAM, 512 Mb Flash, and 128 Mb QSPI Flash. NXP MIMXRT1170-EVK
Retired
No product available!
A universal set of structural elements (plastic beams, plates, metal brackets and fasteners, and a set of screws and nuts). Parts are pre-cut to the most frequently used lengths. Totem TKM-MK1
Retired
No product available!
A universal set of structural elements (plastic beams, plates, metal brackets and fasteners, and a set of screws and nuts). It also includes the necessary tools. Totem TKM-MK2
Retired
No product available!
A universal set of structural elements (plastic beams, plates, metal brackets and fasteners, and a set of screws and nuts). It also includes the necessary tools. Totem TKM-MK3
Retired
No product available!
A set for building an electronic laboratory based on a TotemDuino board. It is a great platform for experimenting, learning electronics and programming Arduino. Totem TKM-MCL1
Retired
No product available!
Side panel with I/O elements for Totem Mini Lab and Totem Micro Lab sets. There are buttons, potentiometers, LED diodes and a relay on the board. Totem TE-SP01-B
Retired
No product available!
Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B
Retired
No product available!
Side panel with audio elements for Totem Mini Lab and Totem Micro Lab sets. The board has an audio amplifier with a loudspeaker, a VU indicator, a function generator and a pi filter circuit. Totem TE-SP03-B
Retired
No product available!
A set for building a fighting robot controlled by a mobile application for a smartphone or tablet. Totem TRK-MT1G
Retired
No product available!
Power HD Low-Profile Digital Servo 1207TG