- Out-of-Stock
Pololu 1936 - Mini Tamiya Connector Pack, Female
ID: 210586
Mini Tamiya Connector Pack, Female
Mini Tamiya Connector Pack, Female
This connector, a smaller version of the female Tamiya connector, is used with battery packs for RC applications. The connector is keyed so it can not be reversed, and the latch secures. You can use a crimping tool to attach your 16- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors .
This connector is keyed so it can not be reversed, and the latch secures. This pack contains enough housings and crimp pins (including two spare pins) for three female connectors. The crimp pins are designed for 16- to 20-AWG wires, and we sell a crimping tool that works well with them. As an alternative, we sell a pre-crimped version of this connector with 10 cm leads.
Note: these connectors are sometimes referred to as the "small" in the RC hobby industry.
|
|
People often buy this product with:
 | Mini Tamiya Connector Pack, Male |
 | Female Crimp Pins for 0.1 "Housings 100-Pack |
 | Crimping Tool: 0.1-1.0 mmÂ? Capacity, 16-28 AWG |
210586
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
AVT kit for self-assembly of resistance welding machine controller. AVT5553 B
Retired
No product available!
The assembled resistance welding machine controller. AVT5553 C
Retired
No product available!
No product available!
AVT kit for self-assembly of the PSK mini-receiver. AVT3168 B
Retired
No product available!
DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. DFR0482
Retired
No product available!
Trenz TE0808-04-09EG-1EA is a module containing the Xilinx Zynq Ultrascale + MPSoC (XCZU9EG-1FFVC900E) system, 2 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and pulse converters for all internal voltages power. Trenz TE0808-04-09EG-1EA
Retired
No product available!
Trenz TE0808-04-09EG-2IA is a module containing the Xilinx Zynq Ultrascale + MPSoC system, 4 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and impulse converters for all internal supply voltages. TE0808-04-09EG-2IB
Retired
No product available!
Miniaturized adaptation Arduino/Genuino 101 board, perfect for wearable and IoT applications, equipped with many of the same features as the 101 line with Bluetooth Low Energy (BLE) capabilities; with 6-axis accelerometer/gyroscope; can be programmed using either the Arduino IDE or Intel Curie Open Developer Kit (CODK). DEV-14281
Retired
No product available!
No product available!
Printed circuit board for triac module. AVT1965 A
Retired
No product available!
AVT set for a stand-alone executive module with triac. AVT1965 B
Retired
No product available!
Assembled executive module with triac. AVT1965 C
Retired
No product available!
Velleman VTV3 mini mini vise in red with a suction cup
Retired
No product available!
No product available!
EXTREME heat shrink tubing for electrical and mechanical insulation, diameter against shrinkage 5.0 mm; diameter after shrinkage 1.5 mm, a set of 10 pieces with a length of 1 meter
Retired
No product available!
The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project! With a default voltage range of 5–28VDC, power can be connected to this shield in one of two ways. DEV-14155
Retired
No product available!
Mini Tamiya Connector Pack, Female