- Out-of-Stock
BuildMecar-Kit-A robot kit for Mecanum robot with Raspberry Pi - Waveshare 21645
ID: 1178669
5906623426409
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with the Raspberry Pi Build HAT expansion module. Waveshare BuildMecar-Kit-A
Description
A set for building a mobile robot with a Mecanum chassis based on a Raspberry Pi minicomputer. The design is based on a set of blocks that allow you to easily modify the vehicle and adapt it to your own needs. The robot is driven by four DC motors and Mecanum wheels, which allow it to move not only forward and backward, but also sideways, which significantly increases its mobility and is an interesting alternative to standard drive systems.
The robot uses the Raspberry Pi Build HAT driver, the official expansion board designed in collaboration with LEGO® Education. It was created to make it easier to control LEGO motors and sensors using RPi mini computers. The HAT comes with four connectors for LEGO Technic motors and sensors from the LEGO® Education SPIKE ™ Prime series.
The set is powered by a 7.4 V Li-Ion battery.
Attention!
The set does not include a 5 MP camera.
The set does not include a 5 MP camera.
The Build HAT Python library allows you to control various motors and sensors with the LPF2 connector, allowing you to create creative combinations using the Build HAT overlay and building blocks. Full documentation and configuration examples are available on the product page.
Features
- Designed on the basis of Raspberry Pi Build HAT
- Constructed of blocks, easy to set up
- 7.4V 2600mAh Li-ion battery
- Mecanum wheels
Kit contains
- A set of blocks
- 4 x motor
- 4 x Mecanum 80mm wheel
- 2 x Self-tightening strap
- 7.4V 2600mAh Li-ion battery
- Raspberry Pi Build HAT
- 8.4V 2A power supply
- Double-sided tape
1178669
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł166.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 89
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 125
Available
Other products in the same category (16)
It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z
Retired
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z
Retired
No product available!
No product available!
The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.
Retired
No product available!
No product available!
No product available!
No product available!
The module with the TXB0108 system enables the connection of systems operating with different voltage levels. It has 8-channels and is 2-way. The transmission direction of each channel is detected automatically. MOD-38.Z
Retired
No product available!
No product available!
The STM32 eXploreM0 module contains a 32-bit microcontroller with ARM Cortex M0 core, STM32F051C8T6 (64 kB Flash memory, 8 kB RAM, 48 MHz, HDMI-CEC, I2C, IrDA, LIN, SPI, UART / USART). The USB / UART converter allows programming of the microcontroller via a USB cable. MOD-40.Z
Retired
No product available!
The STM32 eXploreM0 + module contains a 32-bit microcontroller with ARM Cortex M0 + core, STM32L051C8T6 (64 kB of Flash memory, 8 kB RAM, 32 MHz, I2C, IrDA, SPI, UART / USART). The built-in USB / UART converter enables programming of the microcontroller via a USB cable. MOD-41.Z
Retired
No product available!
No product available!
The RGB LED ruler has 8 programmable LEDs WS2812B with a built-in control system. It is possible to set a specific color for each diode. The module has an IN input for controlling and an OUT output to which further light points or other modules from WS2812B can be connected. The supply voltage is from 3.5 to 5.3 V, and the input voltage +/- 0.5 V of the supply voltage
Retired
No product available!
No product available!
A set for building a mobile robot with Mecanum chassis based on Raspberry Pi. Equipped with the Raspberry Pi Build HAT expansion module. Waveshare BuildMecar-Kit-A