- Out-of-Stock
Teensy 3.1 + header
ID: 210955
Adafruit 1625 - Teensy 3.1 is a small, breadboard-friendly development board, brings a low-cost 32 bit ARM Cortex-M4 platform
1625 - Teensy 3.1 + header
Teensy 3.1 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.1 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language. Teensy 3.1 is an upgrade over 3.0: now with 64K of RAM, 256K of Flash, 5V tolerant digital inputs, 12 bit DAC, dual ADC, and CAN bus support. Teensy 3.1 is a drop-in replacement upgrade for 3.0 and can run any sketches designed for 3.0.
Based on a 32 bit ARM chip, Teensy 3.1 aims to greatly increase the computing capability and peripheral features, but maintain the same easy-to-use platform that has made Teensy 2.0 so successful.
Please note: Teensy 3 and 2 are not official Arduino-brand products. Although the Teensyduino IDE has been adapted so that many simple Arduino projects will work with the Teensy, there will still be a lot of libraries and shields that will not work with this device! If youre new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino projects, examples and libraries will work with it.
Based on a 32 bit ARM chip, Teensy 3.1 aims to greatly increase the computing capability and peripheral features, but maintain the same easy-to-use platform that has made Teensy 2.0 so successful.
Please note: Teensy 3 and 2 are not official Arduino-brand products. Although the Teensyduino IDE has been adapted so that many simple Arduino projects will work with the Teensy, there will still be a lot of libraries and shields that will not work with this device! If youre new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino projects, examples and libraries will work with it.
Technical Specifications:
- 32 bit ARM Cortex-M4 48 MHz CPU (M4 = DSP extensions) Here is Freescales reference manual for the chip (warning 1227 pages) as well as the Datasheet and User Guide!
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21* High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
- 34* Digital I/O Pins (21 shared with analog)
- 10 PWM outputs
- 1 12-bit DAC output
- 8 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- CAN bus
- 3 UARTs (serial ports)
- SPI, I2C, I2S, IR modulator
- I2S (for high quality audio interface)
- Real Time Clock (with user-added 32.768 crystal and battery)
- 16 general purpose DMA channels (separate from USB)
- Touch Sensor Inputs
Information, documentation and specs are on the Teensy site. Please check it out for more details!
Teensy 3.1 + header (7:07)
Technical details
- Dimensions: 1.4" x 0.7"
Download
210955
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
No product available!
The MT9P001 CMOS sensor camera module offers 5MP resolution and high image quality thanks to DigitalClarity™ technology, even in low light. The camera supports global shutter, snapshot mode, and long exposure, enabling precise exposure control and capturing dynamic scenes. Its compact size, low power consumption, and wide range of configuration features make it an ideal choice for advanced DIY projects and image processing systems. ArduCAM B0127
Retired
No product available!
No product available!
VERY SMALL POWER AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION
Retired
No product available!
Cable ties are made of flexible plastic characterized by its high durability, both mechanical and thermal. Lanberg ORG01-BVP400-MC2
Retired
No product available!
Male terminal block, angled, 6-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR
Retired
No product available!
PCB and programmed system for winding the timer with acoustic siren. AVT3143 A +
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 3 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gray
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. It\'s affordable but sounds great! The NXP UDA1334A is a jack-of-all-I2S-trades: you can use 3.3V - 5V logic levels (a rarity), and can process multiple different formats by setting two pins to high or low. Adafruit 3678
Retired
No product available!
Romeo family evaluation kit with Bluetooth 4.0 module. It is based on the STM32F103RET6 microcontroller and has a built-in four-channel DC motor driver. DFRobot DFR0398
Retired
No product available!
Adafruit 1625 - Teensy 3.1 is a small, breadboard-friendly development board, brings a low-cost 32 bit ARM Cortex-M4 platform