- Out-of-Stock

Turnigy nano-tech 2200mah 6S 25~50C Lipo Pack (11913)
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Spec.
Capacity: 2200mAh
Voltage: 6S1P / 6 Cell / 22.2V
Discharge: 25C Constant / 50C Burst
Weight: 353g (including wire, plug & case)
Dimensions: 119x35x46mm
Balance Plug: JST-XH
Discharge Plug: XT60
Suited to the following models: MIKADO LOGO400, ALIGN T-REX500, GUAI EP425/550/X5, Compass Atom 500, MSH Protos500, JR Vibe 500E
* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N2200.6S.25
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Li-Po battery with a rated voltage of 3.7 V and a capacity of 4000 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP805080
No product available!
No product available!
No product available!
Tin LP with a diameter of 2mm on a spool, weight 100g. Stop Sn60Pb40
No product available!
No product available!
HK HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (16272)
No product available!
Insulated fibre-optic probe with a measurement range of up to 1000 V. Operates up to 1 GHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP1000B
No product available!
No product available!
No product available!
The camera set with the AR1335 sensor allows you to control zoom. Works with Raspberry Pi minicomputers. The camera is equipped with a matrix with a resolution of 13 MPx. ArduCAM B016713MP
No product available!
No product available!
No product available!
A set of POD modules dedicated to the Raspberry Pi Zero and Zero 2W. Includes Zero POD Case, USB and HDMI expander module and LAN expander. Waveshare Zero POD KIT A
No product available!
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
No product available!
No product available!
Introduction to Digital Design. Block Diagram / VHDL Examples; Richard E. Haskell & Darrin M. Hanna - EDU
No product available!
No product available!
HK Turnigy nano-tech 2200mah 6S 25~50C Lipo Pack (11913)