- Out-of-Stock

Development kit for AVR ATtiny microcontrollers in DIP8 and DIP20 enclosures
Development kit for AVR ATtiny microcontrollers
The kit allows you to build applications with microcontrollers from the Atmel family of Atmel. Its equipment, ease of adaptation to individual application requirements, as well as the possibility of using microcontrollers in 8- and 20-pin boxes, make the set suitable for both beginners and advanced users who want to quickly build a microprocessor controller.
The set enables testing applications with microcontrollers:
The basic properties of the set:
The set includes:
To download
No product available!
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Cables for evaluation boards, set of 10 pcs., green colour
LCD character display 2x16, 1x16 pin header for evaluation boards
No product available!
Module with digital thermal sensor, thermostat and I2C interface
No product available!
Cables for evaluation boards, set of 10 pcs., yellow colour
Cables for evaluation boards, set of 10 pcs., white colour
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
ATATMEL-ICE-BASIC is a programmer designed to work with AVR microcontrollers with the On-Chip Debug function and microcontrollers with the ARM Cortex-M core from Atmel. Available interfaces are JTAG, SWD, PDI, TPI, aWire, SPI and debugWire.
The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
No product available!
The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator
No product available!
Keyboard module with joystick and 5-bit communication interface
No product available!
Universal Quer power supply with a capacity of 2200mAh for charging portable electronic devices, powered by 5V. The Power bank Quer is charged via the USB port . KOM0808B
No product available!
PCB with programmed system for slow brightener for 12V LED strips. AVT1975 A +
No product available!
No product available!
No product available!
120:1 Plastic Gearmotor Offset OutputPlastic gear motor 120:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and maximum torque of 5.4 kg*cm. Pololu 1119
No product available!
Waveshare aluminum radiator for CPU Raspberry Pi B +, Raspberry Pi 2 and Raspberry Pi 3. Radiator has self-adhesive tape
No product available!
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 75°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0188
No product available!
No product available!
No product available!
No product available!
Starter kit with the Kinetis K32 L2B microcontroller, integrated with the OpenSDA programmer-debugger, LCD display, accelerometer and MEMS magnetometer and USB connector. Conclusions compatible with Arduino. NXP FRDM-K32L2B3
No product available!
No product available!
No product available!
The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4
No product available!
Development kit for AVR ATtiny microcontrollers in DIP8 and DIP20 enclosures