MAX10 FPGA Evaluation Kit (EK-10M08E144ES / P) - starter kit with Altera MAX10 FPGA chip
ID: 338718
Starter kit with the Altera FPGA system from the MAX10 family, which in addition to the classic, configurable logical resources are equipped with a 12-bit ADC converter, Flash memory for the user and internal configuration memory. The set is equipped with Arduino system connectors and basic peripherals for project testing.
Altera MAX10 FPGA Evaluation Kit
Description:
With this set you can:
- Develop projects based on 10M08S (144-EQFP FPGA)
- Measure the FPGA voltage (VCC_CORE and VCC_IO)
- Create bridges between different voltages per I / O (changeable value of VCC_IO in bank 8)
- Clean / save to NOR flash in FPGA
- Use an analog-to-digital converter to measure incoming analog signals
- Connect with external devices via loop-through connectors or Arduino UNO R3 connector
- Use the diagram and plate as a design for your project.
Attention! The set does not include a programmer / downloader.
338718
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
TerasIC USB Blaster Download Cable (UBT) - USB programmer for Altera PLD devices (compatible with...
TerasIC USB Blaster Download Cable (UBT) is a fully Altera USB Blaster–compatible JTAG/ISP programmer for CPLD and FPGA devices. With a reliable design and resistance to interference, it is a universal tool for designers working with Altera programmable devices. TerasIC P0302
zł390.51
24h
Available quantity: 10
Available
No product available!
Altera DE0 NANO Development and Education Board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.
zł519.45
24h
Available quantity: 3
Available
Programmer-configurator PLD (CPLD and FPGA) from Altera, compatible with Altera USB Blaster Download Cable. It supports Altera JTAG and ISP/ICP interfaces.
zł137.96
24h
Available quantity: 7
Available
Other products in the same category (16)
Camera with CMOS AR0330 sensor with a resolution of 2304x1286 px. It communicates via a parallel interface. ArduCAM U6032
Retired
No product available!
Camera in the form of a SoC chip with a CMOS MT9P111 sensor with a resolution of 2592x1944 px. It communicates via a parallel interface or MIPI. ArduCAM U3470
Retired
No product available!
Camera with OV2640 CMOS sensor with a resolution of 1600x1200 px. It communicates via the SCCB parallel interface. ArduCAM U0061
Retired
No product available!
Camera with CMOS MT9M112 sensor with a resolution of 1280x1024 pixels. It communicates via the DVP parallel interface. ArduCAM U6080
Retired
No product available!
Adapter dedicated to Omnivision cameras. Allows you to connect an image sensor to the evaluation kit. ArduCAM B0012
Retired
No product available!
Camera module 18 Mpx with AR1820HS sensor working with Raspberry Pi. It offers a video resolution of up to 4912x3684 pixels at 15 fps. ArduCAM B0164
Retired
No product available!
Camera module based on the OV13850 CMOS matrix with a resolution of 4224x3136 px (13 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0129
Retired
No product available!
ArduCAM OV9281 1MP Global Shutter USB Camera Evaluation Kit - Evaluation Kit with 1MP OV9281 166°...
A set with a camera with a resolution of 1 MPx with an OV9281 sensor, a USB 3.0 adapter and a cable. ArduCAM EK024
Retired
No product available!
Module with USB 2.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI interface. Has a built-in 16 MB hardware frame buffer. ArduCAM B0175
Retired
No product available!
Micro analog servo with plastic gear. It has a range of motion of 90°. GH-S37A
Retired
No product available!
GSM/GPRS + GPS module based on the RDA8955 chip. It integrates protocol stacks such as GSM/GPRS and supports the basic functions of voice calls, SMS and GPS data transmission. DFRobot TEL0134
Retired
No product available!
Aluminum case for minicomputer Raspberry Pi 4 model B, black color
Retired
No product available!
Module with 7-color ACeP e-Paper display, 5.65" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-5.65
Retired
No product available!
HAT module with RTC DS3231SN clock and MAX705 reset system designed for Raspberry Pi and Jetson Nano. The board has a CR1220 battery socket and a C-type USB connector. Waveshare RTC WatchDog HAT
Retired
No product available!
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connectors placed in a vertical position and a connector for RPI 400 at an angle of 45 °. Waveshare PI400-GPIO-ADAPTER-C
Retired
No product available!
The power supply module with the RTC DS3231SN clock is designed for the Raspberry Pi. It allows you to power minicomputer with voltage up to 28 V and create scripts for the power-on sequence. Pimoroni WITTY_PI_3_R2
Retired
No product available!
Starter kit with the Altera FPGA system from the MAX10 family, which in addition to the classic, configurable logical resources are equipped with a 12-bit ADC converter, Flash memory for the user and internal configuration memory. The set is equipped with Arduino system connectors and basic peripherals for project testing.