STK500

2.13" e-Paper display module with 212x104 resolution. The display is connected to a small board with a 40-pin Raspberry Pi compatible connector. The module has the ability to display in three colors: black, white and yellow. Waveshare 2.13inch e- Paper HAT (C)

Module with 3-color (yellow, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. SPI interface. Waveshare 1.54inch e-Paper Module (C)

A computer with a 64-bit Intel Celeron J4105 quad-core processor (x86, 2.5 GHz) and 2 DDR4 RAM memory slots. Additional equipment includes: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K / 60Hz, and four USB ports, 20 GPIO, PCI-e slot and two SATA3 connectors. ODROID H2

Aluminum extensometer beam, allowing measurement of weight up to 20 kilograms. It has four wires. It is used in kitchen scales and portable scales, max. 20 kg, dimensions: 80x7x7 mm, has a 21 cm cable. Tensom20kg02

The set is equipped with a high-performance STEVAL-FCU001V1 flight control unit, as well as engines, propellers, a plastic frame and a battery needed to assemble its own mini-drone. STMicroelectronics STEVAL-DRONE01

VisionCB-RT-STD is a base plate for VisionSOM-RT modules (i.MX RT). The tile contains, among others Ethernet, USB connectors, connectors compatible with Arduino shields and Raspberry Pi hat, 5 buttons and 5 LEDs. VisionCB-RT-STD, SoMLabs

Wireless transceiver operating in the 915MHz band based on the RFM69HCW chip with a maximum power of 100mW and a transmission speed of up to 300kbps. The range in open space is up to 500m. The module communicates via the SPI bus. Arduino compatible. modRFM69HCW_915MHz

Acrylic housing for the Raspberry Pi A + minicomputer made of durable, shiny polycarbonate. Adafruit 2359

Universal expansion shield for prototyping in accordance with Raspberry Pi 2/3 Model B + with screw connections and goldpin type of sockets

Audio extension module for Raspberry Pi 3 Model B / 2B / B + / A + / Zero W with PCM5122 chip and an IR receiver TSOP34838.

74LVC2G125DC,125 is an energy-efficient, high-speed logic buffer with two channels and 3-state outputs, designed for isolating or amplifying digital signals in embedded systems, automation, and applications with mixed logic level interfaces.

ArduCam camera module with autofocus designed for Raspberry Pi. It was equipped with a matrix (Sony IMX219) with 8 MPix resolution and an integrated IR filter. To connect the camera with Raspberry Pi is implemented using a CSI connector. Autofocus allows sharpening in the range from 4 cm to infinity. ArduCAM B0122

Aluminum housing designed for Raspberry Pi B + / 2B / 3B / 3B +. Black colour. RB-ALUcase + 01

In the promotional set:

• Raspberry Pi 3 model A + with WiFi 2.4 and 5 GHz and Bluetooth 4.2
• The official housing for Raspberry Pi 3 Model A +
• Power supply for Raspberry Pi 5V / 3.1A microUSB eXtreme
• Aluminum heat sink for Raspberry Pi - 2 pieces

Minicomputer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). It has a 4 GB DDR3 RAM memory. The computer has been well-equipped, including Gigabit Ethernet connector, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc.

Single high-precision operational amplifier in the SC70-5 housing. STMicroelectronics TSZ121ICT