- Out-of-Stock
AVT1024 B
ID: 46209
HIGH-QUALITY HEADPHONE AMPLIFIER - A SELF-ASSEMBLY KIT
Description
HIGH-QUALITY HEADPHONE AMPLIFIER - A SELF-ASSEMBLY KIT
Listening to music through headphones can be a source of many great aesthetic experiences, provided, however, that the amplifier is of sufficient quality. Therefore, we propose to make a headphone amplifier characterized by very good parameters despite the uncomplicated construction. The two-channel power amplifier bases its construction on the TDA7233 amplifier. For the correct operation, a minimum number of elements is required, which makes the project very simple. To the stereo minijack output connector we connect magnetodynamic headphones with an impedance greater than 2 ohms. The best results are achieved with headphones with impedance of 32 ohms / channel.
Recommendations: the device is especially recommended for enthusiasts of good sound, music lovers and musicians
properties
- Power amplifier operating class: AB
- Output power (Rl = 32 ohms, Ucc = 12V): 800 mW
- Nonlinear distortion: less than 0.3%
- Frequency response 17 Hz-23 kHz
- Input impedance: 90 cells
- Permissible voltage range: 1.8-15V AC or DC
- Power consumption at rest (per channel): approx. 6 mA
- The set includes a printed circuit board, a set of elements (without potentiometer for gain control) and documentation
- A detailed description in EP 10/94
- See also: AVTMOD07
46209
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
You might also like
STROKE FOR STAINS - A SET FOR SELF-ASSEMBLY
Delivery date unknown
No product available!
ELECTRIC MOTOR TURN CONTROLLER - SELF-MOUNTING KIT
Delivery date unknown
No product available!
SMD MICROPHONE AMPLIFIER - KIT FOR INDEPENDENT INSTALLATION
Delivery date unknown
No product available!
Other products in the same category (16)
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
Retired
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
External enclosure designed to protect, transfer and store data on M.2 SSD drives with NVMe or SATA interface. Unitek S1204B
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
HIGH-QUALITY HEADPHONE AMPLIFIER - A SELF-ASSEMBLY KIT