- Out-of-Stock
The Artillery Sidewinder X2 is a 3D printer using FFF/FDM printing technology. It features a very large working area of 300 x 300 x 400 mm. It is equipped with a number of features that make it easy to use, including a filament sensor, automatic table levelling, the ability to resume printing after a loss of power, and a convenient touch panel screen. The main board is equipped with "silent" stepper motor drivers and a powerful power supply.
The automatic table levelling system means that precise positioning of the print platform does not take long. A built-in sensor measures the distance to the table in several places and, thanks to a dynamic compensation process, allows the device to be easily prepared for work. The built-in filament sensor, on the other hand, avoids the unpleasant situation when a printout fails because the spool of material runs out. The printer detects when it is running out of filament and alerts the user.
A very useful feature of the printer is the ability to resume printing after a loss of power. This is particularly important for larger prints where the time exceeds several hours. Losing power at the end of the process often means having to start the printout all over again. The Sidewinder X2 allows you to resume an interrupted print, saving time and filament.
The design uses a double Z-axis system, which consists of two trapezoidal screws with modified nuts. The Direct Drive Titan extruder is responsible for moving the filament, where the material is transported directly to the heating block, which gives good results especially with flexible filaments. These solutions ensure stable operation, which translates into better print quality.
The printer is controlled by a main board based on a 32-bit microcontroller, which guarantees efficient operation as well as high configuration flexibility and easy expansion. Combined with a set of low-noise stepper motor controllers, it provides convenience of use and does not generate nuisance noise. To operate the printer, the user has a convenient screen with a touch panel.
The construction of the printer is made of metal components and the electronic part is hidden under the base of the printer. The modularity makes the whole look aesthetically pleasing, and the assembly of the printer is easy and quick. Filament is placed on a specially prepared mount, and replacement is simple and intuitive. The printer supports a wide range of filaments: ABS, PLA, PVA or HIPS. It works with most popular software. The process of sending files for printing can take place on an SD card, via a USB cable or on a memory stick.
Data sheet
Manufacturer
Responsible person
Easy PLA filament in black, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Black
No product available!
ABS filament in red with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy ABS Red
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
The case has openings for all outputs including the GPIO port making it a great fit for projects that are connected to external hardware.
No product available!
Super charged single board computer with an Octa-core processor and 2GB of RAM. Along side the elite processing unit, it features Gigabit Ethernet, 2 USB, SATA, WiFi, Bluetooth, and HDMI connection. It can run on a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian
No product available!
Works with the ODROID-C2 / C0 / C1+. The HiFi Shield provides both stereo RCA connectors and a 3.5mm stereo jack (all gold-plated) to connect to external amplifiers and other audio equipment
No product available!
No product available!
No product available!
This rev of the RS232 Shield provides with the option to choose between two pins from an Arduino (D0 to D7) as software serial ports to communicate with RS232 Shield. DEV-13029
No product available!
The HSPA / GSM modem card with the miniPCIe connector allows to obtain 14.4 Mbps "up" transmission speed and 5.76 Mb / s "down" transmission, working on four ranges. HUAWEI MU609
No product available!
The STMPS2141STR system is a power switch designed for circuits with high capacitive loads and short circuits. The system is equipped with an N-channel MOSFET 90 mΩ controlled by the input logic level.
No product available!
No product available!
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 100 g spool, 0.25 mm diameter. Cynel SAC307-0.25/100
No product available!
The sponge is indispensable at the time of soldering, it removes tin residues and stains from the tip. Dimensions 45x60mm
No product available!
The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
No product available!
Mini USB Bluetooth dongle compatible with ODROID-C1, C1+, C0, C2 and XU3, XU4
No product available!
It is a USB3.0 adapter for SATA3 HDD / SSD compatible with Odroid XU4, U3 and X2. Equipped with the ASM1051E ASMedia system. The set includes a 12 V / 2 A power supply and a USB3.0 cable. Manufacturer's name: USB3.0 to SATA3 HDD / SSD interface kit
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
3D printer with automatic table levelling and print resume function. Equipped with a dual Z-axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a Direct Drive extruder. Artillery Sidewinder X2