- Out-of-Stock
Two-way 8V 3.3V voltage converter
ID: 557573
The module with the 74LVC245AD system allows connecting systems with different supply voltages. Bi-directional operation mode allows you to change the output to the input using a jumper or DIR input, without the need to disconnect the system. MOD-12.Z
Description
The module is ideally suited for connecting systems operating at different supply voltages. As many as 8 channels and 2-way operation mode allows you to change the output to the input using a jumper or DIR input, without the need to disconnect the system.
The maximum supply voltage is 3.3 V, but the system tolerates input voltages (signals) of up to +5.5 volts. The module also has an ENABLE input, so that you can disconnect the signals at any time. The module can work as a buffer. It is possible to install a short-circuit protection.
properties
- Code and name of the module: MOD-12 8-channel, 2-way voltage converter 5V / 3.3V
- Integrated circuit: 74LVC245AD
- Configuration: DIR to choose the direction of work and ENABLE to enable and disable converter leads
- Power supply: +1.2 V to +3.3 V
- LED signaling: yes
- Dimensions: 27 mm x 22 mm
- Additional information:
- tolerates signal voltage up to + 5.5V
- possibility of installing a short-circuit protection - polymer fuse
- RoHS: yes
The set includes
- assembled MOD-12.Z 8-channel, 2-way voltage converter 5V / 3.3V
- set of connectors for self-assembly (14-pin 2 pcs)
To download
557573
Data sheet
- Number of channels
- 8
- Voltage on page A
- 5 V
- Voltage on side B
- 3,3 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Module with a 4-bit bi-directional voltage level converter. It allows you to connect digital interfaces with different operating voltages. KAmodNTS0104PW
zł18.91
24h
Available quantity: 381
Available
Other products in the same category (16)
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 150 MHz band, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO1152E
Retired
No product available!
Industrial RS485 - Ethernet converter. It is equipped with PoE function and is DIN-rail mounted. Waveshare RS485 TO POE ETH (LF)
Retired
No product available!
10.3" monitor with e-Paper screen equipped with a mini HDMI interface. It offers a resolution of 1872×1404 pixels, a wide viewing angle and low power consumption. Waveshare EINK-DISP-103B (EU)
Retired
No product available!
9.7" monitor with e-Paper screen equipped with a mini HDMI interface. It offers a resolution of 1200x825 pixels, a wide viewing angle and low power consumption. Waveshare EINK-DISP-97 (EU)
Retired
No product available!
A portable gaming console based on the Raspberry Pi Zero, featuring a 2" IPS LCD display and speaker. Waveshare GamePi20 Acce
Retired
No product available!
High voltage differential probe. It is characterized by good measurement parameters: 100 MHz band and working voltage up to 750 V. The probe has two attenuation factors: 50X and 500X and uses the UPI interface. Micsig DP750-100
Retired
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 5600 V. The probe has two attenuation factors: 200X and 2000X. Micsig DP20003
Retired
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 100 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP1003
Retired
No product available!
Probe for measuring direct and alternating current with a current of up to 30 A. Works in the band up to 50 MHz, it can be connected to the oscilloscope through the UPI connector. It does not require an external power supply. Micsig CP503
Retired
No product available!
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a place for a network card. Hardkernel ODROID-H3 Case Type 6
Retired
No product available!
The expansion board is designed to work with Alchitry Au and Alchitry Cu. The board has four 7-segment LED displays, five buttons, 24 LEDs and 24 DIP switches. SparkFun DEV-17278
Retired
No product available!
Minicomputer with Amlogic S922X processor, which integrates the ARM Cortex-A73 quad-core chip and Cortex-A53 dual-core with Mali-G52 GPU and 4GB of RAM. Additional equipment includes: eMMC memory slot, HDMI, microSD card slot and 40-pin GPIO connector. Hardkernel Odroid N2L
Retired
No product available!
Minicomputer with Amlogic S922X processor, which integrates the ARM Cortex-A73 quad-core chip and Cortex-A53 dual-core with Mali-G52 GPU and 2GB of RAM. Additional equipment includes: eMMC memory slot, HDMI, microSD card slot and 40-pin GPIO connector. Hardkernel Odroid N2L
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 8GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 16GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 16GB eMMC Module N2L Linux
Retired
No product available!
eMMC Flash memory module for Hardkernel Odroid N2L computers. 64GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 64GB eMMC Module N2L Linux
Retired
No product available!
The module with the 74LVC245AD system allows connecting systems with different supply voltages. Bi-directional operation mode allows you to change the output to the input using a jumper or DIR input, without the need to disconnect the system. MOD-12.Z