- Out-of-Stock
Development board for ATmega32 microcontrollers
ZL3AVR is evaluation board with Atmel AVR ATmega32 (also other similar microcontrollers in DIP40 package). evaluation board. We hope that the power and quality of our tool allow you to appreciate the advantages of AVR microcontrollers in DIP-40 package (ATmega32 and similar)
Key features
Standard equipment
Manufacturer: Kamami
Manufacturer
Responsible person
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Cables for evaluation boards, set of 10 pcs., green colour
LCD character display 2x16, 1x16 pin header for evaluation boards
Module with digital thermal sensor, thermostat and I2C interface
Cables for evaluation boards, set of 10 pcs., yellow colour
Cables for evaluation boards, set of 10 pcs., white colour
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
ATATMEL-ICE is a programmer designed to work with AVR microcontrollers with the On-Chip Debug function and microcontrollers with the Atmel ARM Cortex-M core. Available interfaces are JTAG, SWD, PDI, TPI, aWire, SPI and debugWire.
No product available!
ATATMEL-ICE-BASIC is a programmer designed to work with AVR microcontrollers with the On-Chip Debug function and microcontrollers with the ARM Cortex-M core from Atmel. Available interfaces are JTAG, SWD, PDI, TPI, aWire, SPI and debugWire.
No product available!
The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
No product available!
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator
Cable with USB type A, microUSB type B, Lightning and USB type C connectors, charging only, cable length 1.8m. LANBERG
No product available!
Cable with USB type A and lightning connectors, cable length 1m. Lanberg CA-USLM-
No product available!
Cable with USB type A and lightning connectors, cable length 1m. LANBERG
No product available!
Cable with USB type A and lightning connectors, cable length 1.8m. LANBERG
No product available!
Cable with USB type A and lightning connectors, cable length 1.8m. Lanberg CA-USLM-
No product available!
Cable with USB type A and lightning connectors, cable length 1.8m. Lanberg CA-USLM-
No product available!
Cable with USB type A and lightning connectors, cable length 3m. Lanberg CA-USLM-10CU-0030-WH
No product available!
Cable with USB type A and lightning connectors, cable length 3m. Lanberg CA-USLM-10CU-0030-BK
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3000mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
No product available!
Processor charger designed for Li-Ion cylindrical batteries in various sizes (including 18650). It can charge batteries both with PCM protection and without protection. The nominal charging current in the main phase is 1A. XTAR MC1S
No product available!
Container for two 18650 batteries. It allows you to safely transport batteries and ensure their proper storage
No product available!
Expansion board equipped with VL6180 distance sensor, based on FlightSense technology. The set is designed to measure distances and detect gestures. X-NUCLEO-6180A1
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with converter Zmod ADC 1410 and Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod ADC 1410 plugged into the SYZYGY interface connector. Digilent 471-036-1
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036-2
No product available!
Black aluminum enclosure designed for Eclypse Z7 evaluation kits. It allows you to protect the set against mechanical damage, while creating a nice looking set. Digilent 250-132
No product available!
Development board for ATmega32 microcontrollers