Xmega eXploreE5 with ATXmega32E5

Xmega eXploreE5 with ATXmega32E5

Description

Xmega eXploreE5 is a minimodule with an ATXmega32E5 microcontroller, which enables the introduction of the AVR Xmega family of microcontrollers into the world. E series microcontrollers are the most energy-efficient from the whole AVR XMEGA family.

They have, among others:

• XMEGA Custom Logic (XCL) - a logical unit containing 2 8-bit counters with systems that can perform logical functions, such as: MUX, AND, NAND, OR, NOR, XOR, XNOR, NOT, D-Flip-Flop, D Latch, RS Latch, additionally connected to the USART port and I / O lines.
• DAC, 2-channel, 12-bit, 1 MSPS
• ADC converter, 16-channel, 12-bit, 300 kSPS
• asynchronous Event System
• TWI interface that can work at 1MHz
• Wake-up system controlled by USART

The module has a programming SPI connector and a PDI connector for programming and debugging the microcontroller. Ideally suits the contact / prototype board. It has a built-in quartz resonator, but it is possible to mount a ceramic resonator or pin connector for a quartz resonator. The built-in USB connector can be used for power supply. At the moment, there is no official software available, which would allow, for example, programming using USB. The module is also equipped with short-circuit protection.

AVR Xmega microcontrollers tolerate signals at +3.3 V. Connecting +5 V signals will damage the microcontroller.

Technical data:

• Code and name of the module: MOD-26 Xmega eXploreE5 with ATXmega32E5
• Integrated circuit: ATXmega32E5-AU
• Protection: polymer fuse
• Clock frequency: 16 MHz (quartz resonator)
• Programming: SPI, PDI
• Debugging: PDI
• Input connector: USB connector used to power the module, also D + and D- signals are connected
• Outputs / output connector: 2 x 18pin, matching the prototype board
• Power supply: from +1,6 V to +3,6 V - VCC pins, + 5 V - USB connector, + 5 V - VIN pin
• LED signaling: yes
• Dimensions: 50 mm x 24 mm
• Configuration: when using the VIN pin, disconnect the USB cable
• Additional information:
  • the possibility of mounting a ceramic resonator or pins for a quartz resonator
  • built-in RESET button
  • built-in stabilizer +3.3 V
• RoHS: yes

Set contains:

• assembled MOD-26. With Xmega eXploreE5
• set of connectors for self-assembly (18-pin 2 pcs)