- Out-of-Stock
KAmodQTR8A - module with eight KTIR0711S reflective sensors
ID: 557734
5906623432509
KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.
Description
The reflective sensor module, consisting of eight KTIR0711S photointerrupter, allows detection of e.g. edges or gaps, and can also act as a line sensor for a "line follower" vehicle. The module construction allows breaking off two sensors, so you can use e.g. six sensors to track the line, and two - to avoid falling of the vehicle.
Features
- Photointerrupter type KTIR0711S
- Embedded 8 sensors
- Recommended distance to the floor: 6mm
- Blackout of the sensor is signalizing with voltage close to the zero
- Possibility of cutting a board with two sensor and using it in other application
- Transistor to the IR emitter control allows to e.g. introducing of the modulation
- Power supply voltage: 5V
- Power consumption: 90mA
- Possibility of power supply with 3.3V (BYPASS jumper is needed)
- Holes for headers soldering
- Mounting holes 3mm
- Module size (without connectors): 75mm x 13mm x 3.2mm
Kit content
- Assembled module board
- 2x straight male headers (2 pin) for soldering
- Straight male headers (3 pin) for soldering
- Straight male headers (4 pin) for soldering
- Straight male dual headers (2 x 8 pin) for soldering
557734
Data sheet
- Type of sensor
- KTIR0711S
- Output type
- analog
- Number of sensors
- 8
- Power supply voltage
- 3,3 V/5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 381
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 169
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 25
Available
QTR-8A Reflectance Sensor Array
zł63.10
Delivery date unknown
No product available!
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.68
24h
Available quantity: 655
Available
Other products in the same category (16)
AVT kit for self-assembly of an adjustable power supply for contact plates. AVT1990 B
Retired
No product available!
Assembled adjustable power supply for contact plates. AVT1990 C
Retired
No product available!
PCB for modular receiver for 80m and 40m bandwidth. Dosia - S-meter signal level meter. AVT3197 A
Retired
No product available!
Pololu motor with 48 CPR encoder, with 227: 1 transmission, standard 12V voltage and 33RPM speed. Polol 3245
Retired
No product available!
Development kit based on the Arm Cortex-M4 32-bit microcontroller with a frequency of 180 MHz. The module has a built-in 2MB Flash memory, 256 KB SRAM, SDRAM controller, HS USB and Ethernet MAC. TWR-K65F180M
Retired
No product available!
FRDM-K28F is a development board for Kinetis microcontrollers based on ARM Cortex-M4 with numerous peripherals including 6-axis digital accelerometer and magnetometer, USB interface, microSD card slot, three-color LED and two user buttons. FRDM-K28F
Retired
No product available!
S32K144EVB-Q100X is an advanced development board from NXP Semiconductors, based on the ARM Cortex-M4 microcontroller, ideal for prototyping embedded applications in automotive and industrial. It supports communication interfaces such as CAN, LIN, SPI, I2C and UART, and thanks to a variety of connectors and compatibility with NXP development tools, it allows easy integration and creation of real-time applications.
Retired
No product available!
X-MCIMX8M-EVK is an evaluation set with an i.MX 8MQuad processor (4 ARM Cortex-A53 cores (operating at 1.5 GHz) and an ARM Cortex-M4 core (operating at 266 MHz). This chip has 1 MB of L2 cache memory. There are 4 GB of LPDDR4 memory, 16 GB of eMMC 5.0 memory, 256 Mb of QSPI memory and a slot for microSD memory cards.
Retired
No product available!
MCIMX6DL-SDP is an NXP evaluation set with i.MX 6Quad Arm Cortex-A9 1 GHz processor, 1 GB of SDRAM memory and USB OTG connector, HDMI, Ethernet connector and SD card slot. It has a built-in LVDS display. MCIMX6DL-SDP
Retired
No product available!
Printed circuit board and programmed circuit for programmed relays. AVT1998 A +
Retired
No product available!
AVT kit for self-assembly card programmed with sequences. AVT1998 B
Retired
No product available!
The assembled relay card programmed with sequences. AVT1998 C
Retired
No product available!
No product available!
Signal analysis kit including the Analog Discovery 2, Analog Discovery BNC adapter, BNC probes and necessary accessories. Digilent 240-123
Retired
No product available!
Braided tape designed to remove excess molten solder. 1.9 mm wide, 15 m long. CHEMTRONICS HQ-WICK-L5
Retired
No product available!
The ZYBO Z7 board (Zynq Board) is a renewed version of the set containing the programmable system from the Xilinx Zynq-7000 - Z-7020 family. Also includes the Xilinx Zynq SDSoC Voucher. Academic version. Digilent 471-015
Retired
No product available!
KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.