- Out-of-Stock
NeoPixel Stick 8 x WS2812 - RGB light ruler with serial connection
ID: 559927
The light line has 8 LEDs type WS2812 - thanks to the built-in controller, it is possible to connect the strips in series and control them with one signal cable. NeoPixel Stick 8 x WS2812
Description
A light ruler constructed based on RGB diodes with a built-in controller (WS2812), allows you to connect further modules based on diodes of this type without increasing the number of signal lines. The LEDs used are in the 5050 (PLLC-6) enclosure, thanks to which the entire PCB is small (54 mm long) and the LEDs are close together (the distance between centers of neighboring LEDs does not exceed 7 mm). Ruler ideally suited to the role of the indicator to the VU-meter or as part of a longer backlight strip.
properties
- 8 WS2812 diodes
- Power supply: 4-7V
- Power consumption: max. 60mA per diode
- Each of the primary colors of the diode (R, G, B) can accept up to 256 levels of brightness
- The ability to get a color in one of over 16.7 million shades of color
- Laminate color: black
- dimensions:
- Length: 54.3mm
- Width: 10mm
- Thickness: 3.3mm
- It has solder pads that allow you to connect modules together without using sockets / plugs
To download
559927
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
zł1.16
24h
Available quantity: 2237
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł25.26
24h
Available quantity: 4
Available
Other products in the same category (16)
No product available!
Michel Chipot
Delivery date unknown
No product available!
No product available!
No product available!
No product available!
The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro:bit’s edge connector allows to connect the micro:bit to breadboards and other sensors, motors, LEDs and more! BOB-13989
Retired
No product available!
No product available!
No product available!
No product available!
High quality acrylic computer case for Orange Pi One, transparent
Retired
No product available!
Male terminal block, angled, 6-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
Retired
No product available!
No product available!
CONTROLLER POWER 230 VAC RECEIVER - A KIT FOR INDEPENDENT INSTALLATION
Delivery date unknown
No product available!
ZigBee module, features the CC2530F256 onboard, farther communication distance with PA
Retired
No product available!
IPS 4" LCD display with touch screen. The display is equipped with DPI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. Waveshare 4inch DPI LCD (B)
Retired
No product available!
No product available!
The light line has 8 LEDs type WS2812 - thanks to the built-in controller, it is possible to connect the strips in series and control them with one signal cable. NeoPixel Stick 8 x WS2812