- Out-of-Stock
iNode Energy Meter opto - module for electricity meter
ID: 560426
A wireless energy consumption monitor with built-in memory, thanks to the analysis of daily consumption, can help reduce the cost of electricity consumption
Description
iNode Energy Meter is a wireless energy consumption monitor with built-in memory where results are saved even every 1 minute. It is designed mainly for home automation. By analyzing daily consumption, it can help reduce energy costs by choosing a better adapted tariff and changing user habits.
The status of the minute and total meters is sent online in the broadcast frame every approx. 1.28 seconds (monitoring of consumption on a regular basis).
properties
Bluetooth Low Energy and GSM / GPRS
- Configurable from PC:
- Power with which the device operates in the range from -18dBm to + 8dBm (maximum range up to 200 m in open space)
- device name
- Energy consumption measurement unit: kWh, m³
- Constant energy meter
- user password
- Device access password; independent of the user's password, password for authorizing the application for a smartphone or PC (protects it against being copied and used by another client)
Power
- CR2032 battery
Housing
- plastic
- Dimensions: Ø 32mm x 9.5mm
others
- The possibility of remote software replacement
- Two LEDs
- Temperature sensor with a resolution of 1 ° C
- Working temperature: from -30 to 65 ° C
- Humidity: 35-80% RHG
- Weight: 5g
Light sensor - photoresistor
- Angle of view:
- ± 12 °
- Spectral range:
- 620nm - 960nm
- Frequency of work:
- Maximum 50Hz
Equipment
- CR2032 battery
Software
- Windows NT / XP / Vista / 7.0 / 8.0
The iNodeSetup.exe configuration software works only on Windows with a Bluetooth adapter based on the CSR 8510 chipset or iNode Serial USB Transceiver , iNode LAN .
Usage
- Reduction of energy bills
- Analysis of daily energy consumption
- Home automation
You can also buy a USB 4.0 Bluetooth adapter available in our offer .
To download
- Instructions for iNode Energy Meter
- The CSR 101x chipset
- Applications for ANDROID and WINDOWS
- Current firmware versions for iNode products are available on the support website: http://support.elsat.com.pl/
User: inode
Password: missing - A page with a script that uses the BT4.0 built-in in Raspberry Pi 3 to receive data from the iNode Energy Meter
560426
You might also like
Low Energy Bluetooth adapter module with USB 2.0 connector. allows communication with BLE devices
zł134.38
24h
Available quantity: 1
Available
The module allows the existence of devices with BLE in networks with the Ethernet protocol, has a BT2.1 receiver
zł226.32
24h
Available quantity: 1
Available
USB adapter for PC, allowing Bluetooth v4.0 communication with speeds up to 3Mb / s and range up to 20m
zł19.74
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a dynamic NFC M24LR64E-R tag and an external antenna. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020070
Retired
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3450 mAh. Sanyo NCR18650GA
Retired
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3400 mAh. Panasonic NCR-18650B
Retired
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 2600 mAh. Sony/Murata US18650VTC5
Retired
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 2600 mAh. Sony/Murata US18650VTC5A
Retired
No product available!
Minicomputer with Allwinner H616 Cortex-A53 quad-core processor. It is equipped with a Mali G31 MP2 GPU and 1 GB of RAM. The set provides WiFi communication and Bluetooth 5.0. Orange Pi Zero2
Retired
No product available!
Minicomputer with 4-core Allwinner V40 ARM Cortex-A7 processor, Mali 400 MP2 GPU graphics card, 1 GB RAM, WiFi, BT 4.0 and numerous connectors. Banana Pi BPI-M2 Berry
Retired
No product available!
The kit is designed to work with Linux. It consists of the SoM (System on Module) Quark-N and the Atom-N expansion board. Seeed Studio 114992462
Retired
No product available!
Development board equipped with an ESP32 module and a 3.5-inch color touch screen. Seeed Studio 102991454
Retired
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera, microphones, LCD display and microSD card slot. Everything is closed in a housing. Seeed Studio 102110425
Retired
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with 2 cameras, microphone, LCD display and microSD card slot. Everything is closed in a housing. Seeed Studio 102110463
Retired
No product available!
Development board based on GD32VF103CBT6 MCU with 32-bit RISC-V core. It is equipped with an IPS RGB LCD display with a diagonal of 0.96 inch 160x80 and a housing. Seeed Studio 102991302
Retired
No product available!
AI module with RISC-V Kendryte K210 chip, which can work with micro: bit, Arduino and Raspberry Pi. Equipped with a camera, microphone, speaker, IPS screen and Wi-Fi communication. Seeed Studio 101990646
Retired
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera and USB Type-C to M.2 adapter. Seeed Studio 102991335
Retired
No product available!
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
Retired
No product available!
A set for building a remotely controlled vehicle based on the micro:bit educational module. Seeed Studio 114991884
Retired
No product available!
A wireless energy consumption monitor with built-in memory, thanks to the analysis of daily consumption, can help reduce the cost of electricity consumption