- Out-of-Stock
eMMC Module C1+/C0 Linux Black - 32GB
ID: 561346
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Description
eMMC Module C1+/C0 Linux Black for ODROID-C0, ODROID-C1 and ODROID-C1+
Pre-installed Ubuntu 14.04 or latest version.
eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode.
Note! ODROID-C1 / C1+ / C0 host supports eMMC version 4.5
The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
This eMMC chipset is not compatible with ODROID-XU4 / XU3 / U3 / U2 / X series
eMMC Module Reader is included
Adapter micro-SD dla modułu eMMC
Moduł eMMC dołączony do adaptera
Storage I/O comparison
To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:
$ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024
$ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024
If you use the eMMC storage, you can get about two to three times faster storage I/O read performance. However, an affordable microSD UHS-1 card can still achieve reasonably fast speeds thanks to the advanced SD 3.01 host controller in the S805 processor. The MicroSD card read performance on C1+ is still about 1.7 times faster then RPi if you use the UHS-1 memory card.
561346
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer and up to 2 SATA 3.5" drives. ODROID-H2 Case Type 1
Retired
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer with additional cooling. ODROID-H2 Case Type 2
Retired
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer and up to 2 SATA 2.5 "drives. ODROID-H2 Case Type 3
Retired
No product available!
Self-assembly case designed for the Odroid H2 computer. It allows you to conveniently mount the Odroid H2 computer and SATA 3.5" or SATA 2.5" drive. ODROID-H2 Case Type 4
Retired
No product available!
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: I-NUCLEO-LRWAN1 and LRWAN_GS_HF1. STMicroelectronics P-NUCLEO-LRWAN2
Retired
No product available!
Arduino UNO set based on the ESP32 WiFi module. The module was designed for cooperation with Arducam 2 MPx and 5 MPx cameras. ArduCAM B0105
Retired
No product available!
Starter kit with the Raspberry Pi 3 model A + minicomputer, the kit also includes the official case for RPI 3 model A and a card with pre-installed NOOBS software and a 116-page guide.
Retired
No product available!
A set of technologies for learning the basics of electronics and Arduino programming. The heart of the set is the SparkFun RedBoard Qwiic board compatible with Arduino. The set contains min. include 16x2, two motors with matching wheels, small servo, TMP36 temperature sensor, ultrasonic, LED, monostable buttons, range sensor, etc. SparkFun KIT-15267
Retired
No product available!
Camera module with Sony IMX179 image sensor with 8 MP resolution. Compatible with Raspberry Pi. Supports MJPG YUY2 data format. It has a built-in IR filter and autofocus function. ArduCam B0197
Retired
No product available!
The computer with Intel Celeron N4100 processor has 4GB RAM and 32GB eMMC. It has Wi-Fi, Bluetooth 4.0, Ethernet, as well as Intel HD Graphics. It can support the SSD drive. Has support for Windows 10 and Linux. DFRobot DFR0543
Retired
No product available!
The computer with Intel Celeron N4100, has 4GB RAM and 32GB eMMC. It has Wi-Fi, Bluetooth 4.0, Ethernet, as well as Intel HD Graphics. Has support for Windows 10 and Linux. Version with activated Windows 10 Pro. DFRobot DFR0544
Retired
No product available!
The computer with Intel Core M3-8100Y processor, has 8GB RAM. It has Wi-Fi, Bluetooth 4.0, Ethernet, as well as Intel HD Graphics. It can support the SSD drive. Has support for Windows 10 and Linux. DFRobot DFR0545
Retired
No product available!
Akyga lithium-polymer battery with a rated voltage of 3.7 V and a capacity of 1500 mAh is equipped with PCM protection and a connector + 2.54 JST socket. The small size and large capacity allows it to be used to power all kinds of portable devices of various sizes and shapes
Retired
No product available!
Pocket-sized digital oscilloscope with memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display, USB port and charging function. Seeed Studio 109990013
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.5mm and an external diameter of 1.8mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.2mm and an external diameter of 1.6mm.
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode