- Out-of-Stock
Orange Pi Zero 256MB RAM Quad-Core H2
ID: 563156
Orange Pi Zero is a mini-computer with a powerful H2 Quad-Core ARM Cortex-A7 processor at a very good price. The computer is equipped with 256 MB DDR3 RAM, WiFi module, Ethernet 10 / 100Mbps port and 1x USB Host, 1x microUSB OTG, 26 GPIO and microSD card connector. Works with Android, Lubuntu, Debian and Raspbian systems
Description
Orange Pi Zero is a mini-computer with a powerful H2 Quad-Core ARM Cortex-A7 processor at a very good price. The computer is equipped with 256 MB DDR3 RAM, WiFi module, Ethernet 10 / 100Mbps port and 1x USB Host, 1x microUSB OTG, 26 GPIO and microSD card connector. Works with Android, Lubuntu, Debian and Raspbian systems.
To start Orange Pi Zero, install the selected operating system on the microSD card (with a capacity of not more than 64 GB), then insert the card into the microSD slot that was placed on the board.
properties
- Processor: H2 Quad-Core ARM Cortex-A7
- RAM memory: 256 MB (DDR3)
- 1x USB connector
- 1x microUSB OTG socket
- WiFi module - XR819, used for wireless communication in the IEEE 802.11 b / g / n standard
- Ethernet socket, giving the possibility of direct connection to the LAN.
- GPIO x 26 pin and 13 pin connector - general purpose / output, which can be used to operate LEDs, buttons, motor controllers. Among them there are pins that support interfaces: I2C, SPI and UART.
- MicroSD socket
Recommended accessories
- 5-volt / 2.5-volt micro USB adapter from Akyga
- The 5V / 3.1A micro USB power supply from Extreme
- The Kruger & Matz 5V / 3A microUSB + DC power supply
563156
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Power adapter for Raspberry Pi 5V / 2,5A from Akyga with microUSB connector. Made of high quality material. It has protection against overcharging and overvoltage. The cable length is 1.5 m.
zł36.53
24h
Available quantity: 8
Available
Orange Pi NAS expansion card makes it possible to transform an Orange Pi Zero into a file sharing server by plugging in an external SATA hard drive
Delivery date unknown
No product available!
Other products in the same category (16)
This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our Orangutan robot controllers and the 3pi robot. Pololu 3170
Retired
No product available!
EXtreme CC312U 3100mA power supply / car charger with two USB ports, allows you to charge phones, navigation, mp3 / mp4 players and connect Raspberry Pi computers
Retired
No product available!
AVT kit for self-assembly of an extremely effective bomb clock. AVT3128 B
Retired
No product available!
AVT kit for self-assembly of the battery capacity meter and the level of battery consumption. AVT5500 B
Retired
No product available!
433M wireless module for SPI interface, vertical pinheaders, 1.27mm pitch
Retired
No product available!
high performance e-compass, 3D accelerometer and 3D magnetometer module, I2C interface, LSM303DLHC on board
Retired
No product available!
three-axis digital output gyroscope, three-axis angular rate sensor module, I2C/SPI interface, L3G4200D on board
Retired
No product available!
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
Retired
No product available!
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
Retired
No product available!
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
Retired
No product available!
Raspberry computer case: Pi 3 model B +, Pi 3 model B, Pi 2 model B and Pi 1 model B + in gray with metal
Retired
No product available!
Battery: Li-Ion; 3.7V; 1000mAh; Outputs: wires with 2-pin JST-PH connector; 50.8 mm x 33.5 x 5.9 mm. PRT-13813
Retired
No product available!
No product available!
This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/16-step).
Retired
No product available!
Wheels fit 2 mm diameter output shafts such as the ones on our sub-micro plastic planetary gearmotors. Pololu - 2356
Retired
No product available!
JEKEN CE-6200A ultrasonic cleaner, with digitally adjustable working time, power 70 W and a capacity of 1.4 l. It is well suited for repair and maintenance of electronic components, PCBs, optical elements, as well as for the dissolution of polymers
Retired
No product available!
Orange Pi Zero is a mini-computer with a powerful H2 Quad-Core ARM Cortex-A7 processor at a very good price. The computer is equipped with 256 MB DDR3 RAM, WiFi module, Ethernet 10 / 100Mbps port and 1x USB Host, 1x microUSB OTG, 26 GPIO and microSD card connector. Works with Android, Lubuntu, Debian and Raspbian systems