- Out-of-Stock
FriendlyELEC NanoPC T2
ID: 564606
Minicomputer with a quad-core processor (up to 1.4GHz) and 1 GB of DDR3 RAM, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T2
Description
NanoPC T2 is a small size board with a quad-core Samsung S5P4418 processor that works with a frequency of up to 1.4 GHz. The processor has 1 GB of DDR3 RAM available. In addition, the minicomputer has 8 GB of eMMC Flash memory, WiFi 2.4G module, Bluetooth 4.0 and an audio socket. Rich video interfaces and HDMI 1080P support enable cooperation with not only popular display devices, but also with various FriendlyELEC LCD screens (both resistive touch and capacitive). NanoPC T2 works with UbuntuCore, Debian and Android operating systems.
properties
- Processor: Samsung S5P4418 Quad Core Cortex-A9 1.4G Hz
- RAM memory: 1 GB 32-bit DDR3 RAM
- EMMC memory: 8 GB
- SD card slot
- Ethernet: Ethernet Gb / s port (RTL8211E) with a unique MAC
- Wi-Fi: 802.11b / g / n
- Bluetooth: 4.0
- Antenna: IPX antenna
- Video input: DVP / MIPI-CSI camera (two camera interfaces)
- Video output: HDMI Type-A / LVDS / LCD / MIPI DSI
- Audio: 3.5mm audio jack / via HDMI
- Built-in microphone
- USB: 4 x USB 2.0 host, two standard A ports and two with 2.54 mm raster
- MicroUSB: MicroUSB 2.0, type A.
- LCD interface: 45-pin 45-pin FPC socket, full RGB 8-8-8 color
- HDMI: 1.4A Type A, 1080P
- DVP camera: 24-pin 24-pin FPC socket
- GPIO: 30-pin 2.54 raster
- Debug Port series: 4pin connector with 2.54 mm pitch
- LED: power LED, 2 x GPIO diode
- User button: K1 (power supply), Reset
- Other resources: thermistor
- RTC battery
- OS / Software: u-boot, Android 4.4, Android5.1 and Debian8
- Power supply: DC 5 V / 2 A
- Heatsink: heat sink with mounting holes
- Board dimensions: 100 x 60 mm
- Working temperature: -40 ~ 70 ℃
Placement of elements and description of pins
564606
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Minicomputer with an octa-core processor (up to 1.4GHz) and 2 GB of DDR3 RAM memory, 16 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T3 Plus
Regular pricezł877.83zł639.00
24h
Available quantity: 2
Available
Other products in the same category (16)
No product available!
Knives designed for cutting paper, wallpaper, foil, etc. z29343
Retired
No product available!
The detector detects hidden objects behind walls, such as metals, live electrical cables and wood. Equipped with a display with indicators and an acoustic signaling device. Uni-T UT387B
Retired
No product available!
A small board with an OV5640 camera and an STM32H743II ARM microcontroller with a Cortex M7 core. The module allows for easy implementation of image analysis in devices / robots. Equipped with 32 MB external 32-bit SDRAM and 32 MB external QSPI flash memory. SparkFun SEN-16989
Retired
No product available!
Minicomputer with AllWinner H6 ARM Cortex-A53 quad-core chip and 1 GB of LPDDR3 memory. The module is equipped with a Mali T720 graphics processor supporting OpenGL and DirectX. The board has numerous communication interfaces: Ethernet, USB, audio and a TF card slot. Orange Pi One Plus
Retired
No product available!
Minicomputer with AllWinner H6 ARM Cortex-A53 quad-core chip and 1 GB of LPDDR3 memory. The module is equipped with a Mali T720 graphics processor supporting OpenGL and DirectX. The board has numerous communication interfaces: WiFi, BT, USB 3.0, audio and a TF card slot. Orange Pi Lite2
Retired
No product available!
DC-DC Step-Down converter module with an output voltage of 3.3V and a current efficiency of 3A. The module is based on the MP2307DN chip.
Retired
No product available!
The AI accelerator with a USB connector is based on the Lightspeeur SPR2801S chip with a performance of up to 9.3 TOPS per watt. Optimized for use with single board computers based on Allwinner SoC chips, incl. Orange Pi. Orange Pi AI Stick Lite
Retired
No product available!
2-channel module with 12V relays and a radio receiver in a set with a remote control operating at 433 MHz
Retired
No product available!
Set with HQ camera, HDMI adapter, lens, tripod. Designed for NVIDIA Jetson Nano and Xavier NX. ArduCAM B0250
Retired
No product available!
CraftBot FLOW 3D printer made of the highest quality components, with a filament sensor, semi-automatic calibration and wireless connectivity. Thanks to its intuitive operation, the printer will be perfect for both professionals and beginners
Retired
No product available!
CraftBot FLOW XL 3D printer made of the highest quality components, with a filament sensor, semi-automatic calibration and wireless connectivity. Thanks to its intuitive operation, the printer will be perfect for both professionals and beginners. XL version with increased print area
Retired
No product available!
CraftBot FLOW IDEX 3D printer made of the highest quality components, with a filament sensor, semi-automatic calibration and wireless connectivity. Thanks to its intuitive operation, the printer will be perfect for both professionals and beginners
Retired
No product available!
CraftBot FLOW IDEX 3D printer made of the highest quality components, with a filament sensor, semi-automatic calibration and wireless connectivity. Thanks to its intuitive operation, the printer will be perfect for both professionals and beginners
Retired
No product available!
The case is made of ABS plastic (black) with a built-in fan, designed for Raspberry Pi 4 model B. The case provides access to all connectors of the minicomputer.
Retired
No product available!
Portable 7" monitor with touch screen. The monitor is equipped with HDMI interface for image display and USB for touch screen. High resolution 1920x1080 pixels. Waveshare 7inch FHD LCD
Retired
No product available!
Minicomputer with a quad-core processor (up to 1.4GHz) and 1 GB of DDR3 RAM, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T2