- Out-of-Stock
AlphaBot-Pi Chassis Acce Pack - Waveshare 12374
ID: 565624
5906623421893
This kit comes with AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan head)
Overview
This kit comes with AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan head).
With modules in the kit, you can fast get started with robotic development like line tracking, obstacle avoidance, IR remote control, and video monitoring via network, etc. What's more, thanks to the rich Raspberry Pi open source resources, and the modular design of AlphaBot, you'll learn how to extend and refit, and finally build your own Raspberry Pi robot.
AlphaBot Features
- Raspberry Pi/Arduino interfaces, works with either one separately, or both
- Arduino extend header, supports Arduino shields
- Modular design, plug-and-play modules like line tracking, obstacle avoidance, speed measuring, etc. eliminating the trouble of connecting mess wires.
- LM298P motor driver with diode protection circuit, more safety
- LM2596 voltage regular, provides stable 5V power to the Raspberry Pi/Arduino
- TLC1543 AD acquisition chip, allows the Pi to use analog sensors
What's on the AlphaBot Mainboard
- Raspberry Pi interface: for connecting Raspberry Pi
- Arduino interface: for connecting Arduino
- Motor interface
- Ultrasonic module interface
- Servo module interface
- Obstacle avoidance module interface
- Speed measuring interface
- Battery holder: supports 18650 batteries
- Reserved power input (not soldered): for connecting other external power supply
- Arduino expansion header: for connecting Arduino shields
- UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth
- SPI interface: for connecting NRF24L01 wireless module
- Line tracking module interface
- TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
- LM298P: dual H bridge motor driver chip, up to 2A current
- Anti-reverse diode
- Power switch
- LM2596: 5V regulator
- Power indicator
- UART switch: turn on to enable serial communication between Raspberry Pi and Arduino
- IR receiver: control the robot remotely via infrared
- Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals
Selection Guide
| Package Contents | Products | |||||
|---|---|---|---|---|---|---|
| Item | Description | AlphaBot | AlphaBot-Ar-Basic | AlphaBot-Ar-Bluetooth | AlphaBot-Pi Acc Pack | AlphaBot-Pi |
| RPi3 B | Raspberry Pi 3 Model B | √ | ||||
| UNO PLUS | enhanced control board, Arduino compliant | √ | √ | |||
| AlphaBot chassis kit | mainboard, wheels, drivers, etc. | √ | √ | √ | √ | √ |
| Tracker Sensor | line tracking module | √ | √ | √ | √ | √ |
| Photo Interrupter Sensor | speed measuring module (2pcs) | √ | √ | √ | √ | √ |
| Infrared Proximity Sensor | obstacle avoidance module (2pcs) | √ | √ | √ | √ | √ |
| IR remote controller | remotely control the robot | √ | √ | √ | √ | √ |
| SG90 | servo | √ | √ | √ | √ | |
| Ultrasonic sensor | ultrasonic obstacle avoidance, distance measuring | √ | √ | |||
| Accessory Shield | accessories add-on board, Arduino compliant | √ | ||||
| Dual-mode Bluetooth | dual-mode Bluetooth module | √ | ||||
| RPi Camera (B) | Raspberry Pi camera, adjustable focus | √ | √ | |||
| Micro SD Card 16GB | 16GB Miro SD Card, class 10 | √ | √ | |||
| 5V 2.5A Power Adapter | RPi3 B requires 2.5A or above power supply | √ | √ | |||
Note:
AlphaBot requires a control board, Arduino OR Raspberry Pi, if you don't have one in hand, please consider the all-in-one kits: AlphaBot-Ar-Basic, AlphaBot-Ar-Bluetooth, AlphaBot-Pi
AlphaBot-Pi Acc Pack requires the control board Raspberry Pi, if you don't have one in hand, please consider the all-in-one kit: AlphaBot-Pi
Weight: 0.526 kg
AlphaBot Standard
Note: this product requires two 18650 batteries to work, which are NOT included and should be purchased separately.
- AlphaBot mainboard x1
- Tracker Sensor x1
- Photo Interrupter Sensor x2
- Infrared Proximity Sensor x2
- Motor with gearbox 2PCS x1
- AlphaBot wheel 2PCS x1
- AlphaBot acrylic chassis x1
- Motor mounting plate 4PCS x1
- omni-direction wheel x1
- 20-slots encoder disk 2PCS x1
- IR remote controller x1
- XH2.54 4cm 4Pin 2PCS x1
- XH2.54 4cm 3Pin 2PCS x1
- XH2.54 4cm 7Pin x1
- AlphaBot screws x1
565624
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
This AlphaBot2 robot kit is designed to use with an Arduino compatible board UNO PLUS. It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication.
zł357.52
24h
Available quantity: 2
Available
Other products in the same category (16)
The board with the microcontroller STM32F405RGT6 in the set with the base board and expansion modules. Waveshare Open405R-C Package B
Retired
No product available!
No product available!
AVT kit for self-assembly of universal time relay with SKEDD connector. AVT5610 B
Retired
No product available!
In the continuation of its new Ugears Games series of models dedicated to board games, Ugears proudly presents The Dice Keeper. If you are a dice collector, a passionate gamer, or just fond of unique mechanical devices, The Dice Keeper is exactly what you need. This model will become your favorite accessory to your table top battles as well as a great addition to your collection of wooden 3D puzzles from Ugears Games. UGears 70072
Retired
No product available!
No product available!
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. NanoV2 3.2"
Retired
No product available!
Universal 150 W charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It has a built-in function of generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M6 V2 Black
Retired
No product available!
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. Capacity 64GB, Android operating system installed. The set includes a microSD adapter. Hardkernel
Retired
No product available!
Bluetooth 2.0 + EDR module based on RN42. It communicates via the UART interface. SparkFun WRL-12577
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Blue Pearl
Retired
No product available!
No product available!
ESP32-P4-WIFI6-DEV-KIT-A is an advanced development kit with a 5 MP camera and Wi-Fi 6 support, intended for implementing HMI projects, voice control, vision systems and network applications. The integration of multimedia interfaces, Ethernet and hardware security enables the creation of modern, high-performance IoT systems.
Retired
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. Capacity 64GB, installed Linux operating system. The set includes a microSD adapter. Hardkernel
Retired
No product available!
This kit comes with AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan head)