- Out-of-Stock
Power cable eight IEC C7 250V / 50Hz 1.5m
ID: 574214
Akyga power cord, IEC C7 250V / 50Hz, 1.5 m long
Description:
High-quality, eight-meter long power cable, 1.5 m long. Designed for powering devices with low power consumption, up to 2.5A. Compatible with the IEC C7 plug.
Features:
- Voltage: 250 V
- Intensity: 2.5 A
- Cable length: 1.5 m
- Plug-in 1: CEE 7/16 (Europlug)
- Plug 2: IEC C7
- Wire material: CCA
- Insulation material: PVC
- Cable diameter: 5 mm
- Color: Black
- Dimensions: 180 x 50 x 40 mm
- Weight: 64.6 g
574214
Data sheet
- Plug
- IEC C7
- Cable length (m)
- 1.5m
Manufacturer AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Responsible person AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
You might also like
Akyga IEC C13 CEE 7/7 250V / 50Hz angle cable with a length of 1.5 meters
zł7.44
24h
Available quantity: 16
Available
Other products in the same category (16)
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L YELLOW
Retired
No product available!
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 30:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1920 counts per revolution of the gearbox’s output shaft. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.
Retired
No product available!
No product available!
PCB with programmed circuit for resistance welding machine controller. AVT5553 A +
Retired
No product available!
Arduino compatible eval-board based on Analog Devices ADuCM360/361 microcontroller
Retired
No product available!
No product available!
USB WiFi adapter with external antenna based on RTL8188CUS-GR system in accordance with 802.11 b / g / n standards (up to 150 Mbps), operates on 2.4 GHz frequency. The card works with Odroid HC2 / HC1 / XU4 / C2 / C1 + / C0 computers
Retired
No product available!
HAT designed for Raspberry Pi 3B+ and Raspberry Pi 4B minicomputers. HAT enables direct power supply of the minicomputer from the Ethernet port. The module is powered by 37 to 57 V, supplies 5V and 3A. ArduCam U6102
Retired
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
No product available!
XBee Pro Module - Series 1 - 18dBm without Wire Antenna, U.FL, Digi International, RoHS
Retired
No product available!
No product available!
No product available!
No product available!
Akyga power cord, IEC C7 250V / 50Hz, 1.5 m long