- Out-of-Stock
NanoPi NEO-LTS is a small minicomputer with a quad-core Alwinner H3 chip (ARM Cortex-A7). It is equipped with 512 MB RAM, 100 Mbps Ethernet port and USB 2.0 port. The module has a 24-pin connector with UART, I2C, SPI, I2S buses and two additional USB 2.0 interfaces. There are also audio outputs on the board. The minicomputer is powered by a microUSB connector, and the operating system is run from a microSD card.

The minicomputer can run under Linux with the Kernel version Linux-4.14-LTS, including FriendlyCore 16.04, FriendlyWrt 19.07.1, Ambian, DietPi, Lakka and Kali. Full documentation and operating system configuration guide are available on the product Wiki page.
Manufacturer
Responsible person
Power adapter for Raspberry Pi 5V / 2,5A from Akyga with microUSB connector. Made of high quality material. It has protection against overcharging and overvoltage. The cable length is 1.5 m.
microSDHC memory card with a capacity of 128GB, Class10 UHS-I U1 speed class, maximum read speed of up to 100MB/s, supplied with an SD adapter. GoodRam M1AA-1280R12
No product available!
microSDHC memory card with a capacity of 32GB, Class10 UHS-I U1 speed class, maximum read speed of up to 100MB/s, supplied with an SD adapter. GoodRam M1AA-0320R12
microSDXC memory card with a capacity of 64GB, Class10 UHS-I U1 speed class, maximum read speed of up to 100MB/s, supplied with an SD adapter. GOODRAM M1AA-0640R12
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
The 10 W AC adapter provides 5 V and 2 A current. It is equipped with a 1 m cable with microUSB plug. Akyga AK-TB-23
No product available!
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0150-BK
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0200-BK
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0300-BK
A universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacitance and frequency. Equipped with diode tester, circuit continuity test, automatic circuit breaker and Hold functions. Uni-T UT136B
No product available!
A universal multimeter allows you to measure direct and alternating voltage, direct and alternating current, resistance and frequency. Equipped with diode tester, circuit continuity test, automatic circuit breaker, NCV test and Hold functions. Uni-T UT136D
No product available!
A universal multimeter measures DC and AC voltage, resistance and capacity as well as frequency. Equipped with diode tester, continuity test, Hold function and automatic switch off. Uni-T UT120B
No product available!
Universal multimeter for automotive diagnostics. It allows you to measure direct and alternating voltage, direct and alternating current, resistance, temperature and capacity as well as frequency. It enables the measurement of parameters specific to the automotive industry, such as RPM or DWELL. Uni-T UT109
No product available!
A universal multimeter allows you to measure direct and alternating voltage, direct current and resistance. Equipped with diode tester, circuit continuity test, battery test, automatic switch and automatic backlight. Uni-T UT33B+
No product available!
A universal multimeter allows you to measure direct and alternating voltage, direct current, resistance and temperature. Equipped with diode tester, circuit continuity test, automatic switch and automatic backlight. Uni-T UT33C+
No product available!
A universal multimeter allows you to measure direct and alternating voltage, direct current and resistance. Equipped with diode tester, circuit continuity test, NCV test, automatic switch off and automatic backlight. Uni-T UT33D+
No product available!
Portable tBook mini oscilloscope with 8 "LCD display and touch screen. It has two measuring channels and is characterized by good measurement parameters: 150 MHz band, sampling rate of 1 GSa/s and 28 Mpts memory buffer. Micsig TO1152 Plus
No product available!
Portable tBook mini oscilloscope with 8 "LCD display and touch screen. It has four measuring channels and is characterized by good measurement parameters: 100 MHz band, sampling rate of 1 GSa/s and 28 Mpts memory buffer. Micsig TO1104 Plus
No product available!
Portable oscilloscope for automotive applications with 8-inch LCD display and touch screen. It has two measurement channels and is characterized by good measurement parameters: 100 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig ATO1102
No product available!
Portable oscilloscope for automotive applications with 8-inch LCD display and touch screen. It has four measurement channels and is characterized by good measurement parameters: 100 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig ATO1104
No product available!
Portable Smart oscilloscope with 8-inch LCD display and touch screen. It has four measurement channels and is characterized by good measurement parameters: 100 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig STO1104 Plus
No product available!
Portable Smart oscilloscope with 8-inch LCD display and touch screen. It has two measurement channels and is characterized by good measurement parameters: 150 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig STO1152 Plus
No product available!
High voltage differential probe. It has good measurement parameters: 100 MHz band and operating voltage up to 1300 V. The probe has two damping factors: 50X and 500X. Micsig DP10013
No product available!
Easy-to-use and intuitive 3D printer with a touch screen and USB, WiFi and cloud file transfer support. The printer is fully assembled and ready to use. Flashforge Finder
No product available!
Easy-to-use and intuitive 3D printer with a touch screen and USB, WiFi and cloud file transfer support. The printer is fully assembled and ready to use. Flashforge Adventurer 3
No product available!
Minicomputer with Allwinner H3 quad-core chip (ARM Cortex-A7). It is equipped with 512 MB RAM memory, an Ethernet port and 3 USB 2.0 interfaces. NanoPi NEO-LTS 512MB