- Out-of-Stock
Module with USB type C connector designed for prototyping devices. The pins have been led out on the connector with a raster of 2.54 mm, which greatly facilitates the use of USB type C, e.g. with breadboards. SB Components 27330
Module with USB type C connector designed for prototyping devices. The board gives access to the power pins (5V and GND), differential data (D+ and D-), CC and SBU configuration channel. The pins have been led out on the connector with a pitch of 2.54 mm, which greatly facilitates the use of USB type C, e.g. in combination with a breadboard. The module has no derived RX and TX differential signals, which means that it does not allow data transfer in the USB 3.1 standard.
The USB Type-C connector is the latest type of USB connector designed to replace a wide range of existing sockets. It can be used as both a USB host and a device, allowing either end of the cable to be plugged into the socket either way up, and can be powered by Power Delivery (20V, 5A).
Manufacturer
Responsible person
Cable with USB type A and USB type C plugs, length 2m, white
Cable with USB type C and USB type B 2.0 plugs, cable length 1.8 m, black color. Lanberg CA-USBA-13CC-0018-BK
16-channel logic analyzer with a maximum sampling frequency of 100 MHz. It can decode data under most popular communication protocols. Works with Windows systems. LA1016
No product available!
USB camera module with a resolution of 8 MP based on a Sony IMX179 1/3.2" matrix compatible with UVC. It has a variable focal length adjustable in the range from 2.8 to 12 mm. Equipped with a CS mount lens with an integrated UV filter. ArduCAM UB0226
No product available!
The evaluation kit is equipped with the Lattice iCE40 HX FPGA chip. The kit is supported by iCEcube2 and Verilog and Lucid languages. SparkFun DEV-16526
No product available!
Handheld thermal imaging camera with a 3.2" LCD display. It measures the temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-18
No product available!
Handheld thermal imaging camera with a 3.2" LCD display. It measures the temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-19
No product available!
A hand-held thermal imaging camera with a 2.4 "LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02
No product available!
Handheld thermal imaging camera with a 2.8" LCD display. It measures the temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-04
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. The camera has a FoV 100° lens with M12 mount. ArduCAM B0245
No product available!
Camera module with a resolution of 2 MP equipped with an image sensor AR0230. The camera has a FoV 90° lens with M12 mount. ArduCAM B0247
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. The camera has a FoV 60° lens with M12 mount. ArduCAM B0248
No product available!
L76X GNSS receiver module . It can receive data from GPS, BDS and QZSS systems. It uses a UART interface and offers an accuracy of up to 2.5 meters. Waveshare L76X GPS Module
No product available!
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
No product available!
Lens Mount Adapter for Canon EOS Lens to C-Mount, Compatiable with All EF, EF-S Lens to Raspberry Pi HQ Camera. ArduCAM UB0228
No product available!
The functional/arbitrary generator allows you to generate sinusoidal, square and ramp signals or add noise to the signal. It provides modulations such as AM, PM, FM, ASK, FSK. Equipped with a transparent 4.3" LCD display and USB interface. Uni-T UTG1010A
No product available!
Programmable, linear laboratory power supply with adjustable supply voltage up to 30V and current up to 5A. The power supply has two 30V/5A output channels and one 5V/3A channel. Equipped with a USB and RS-232 interface. Uni-T UTP3305C
No product available!
Laser distance meter with a range of up to 40m and a resolution of 1mm. Equipped with a 2" display. It can measure length, area and volume with the push of a button. Uni-T LM40
No product available!
Module with USB type C connector designed for prototyping devices. The pins have been led out on the connector with a raster of 2.54 mm, which greatly facilitates the use of USB type C, e.g. with breadboards. SB Components 27330