- Out-of-Stock
New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
UDB1105S - DDS signal generator in the range of 0.01Hz - 5MHz
ID: 579354
The DDS generator with alphanumeric display allows you to generate sine, rectangular or triangle waveforms with a frequency of up to 5MHz. The device can also be used to measure frequencies in the 1Hz-60MHz range.
Description
DDS signal generator with a wide range of generated frequency (0.01 Hz - 5 MHz), in a small and handy housing with a legible alphanumeric display with organization of 16x2 characters. It can also be used to measure frequencies in the 1Hz-60MHz range.
Features
- Output signal:
- Function shape: Triangle, Rectangle, Sine
- Output amplitude: ≥ 10Vpp at no load
- Output impedance: 50Ω ± 10%
- Offset (DC): ± 5V at no load
- The range of generated frequencies: 0.1 Hz - 5MHz
- Resolution: 0.01 Hz
- Frequency stability: ± 1 * 10E-6
- Frequency accuracy: ± 5 * 10E-6
- Sine wave distortion (at 1kHz reference frequency): ≤ 1%
- Triangular linearity: ≥98% (0.1Hz-1kHz)
- Ramp down/rise time: ≤ 30nS
- Square wave fill range: 1% -99%
- TTL output function:
- Generated frequency range: 0.1Hz-5MHz
- Amplitude:> 3Vpp
- Fan-out factor:> 20 TTL loads
- Counter function:
- Counting range: 0-4294967295
- Frequency measurement range: 1Hz-60MHz
- Input voltage range: 0.5Vpp-20Vpp
- Sweep function:
- Sweep range: fm1-fm2, where fm1, fm2 - any frequency within the generator's operating range
- Input voltage range: 0.5Vpp-20Vpp
Kit contains
- UDB1105S generator
- BNC cable with crocodile clips
- Power Supply
579354
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Oscilloscope Probes (pair). 460-004
zł136.75
24h
Available quantity: 4
Available
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
zł52.64
24h
Available quantity: 4
Available
BNC connector adapter cable for mini-grabber clips. Connects to Analog Discovery 2 via a BNC adapter. Digilent 240-136
zł47.95
24h
Available quantity: 1
Available
Other products in the same category (16)
DCC CONTROLLER THE RAILWAY UNPRODUCTION CABLE - PLATE PCB AND PROGRAMMED SYSTEM
Delivery date unknown
No product available!
Single-board computer with Samsung S3C6410 processor (ARM11) with 7 inch display and touchpanel
Retired
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Karmin Red
Retired
No product available!
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector.
Retired
No product available!
No product available!
No product available!
Machine Screw: M3, 5mm Length, Phillips (25-pack)
Retired
No product available!
No product available!
Camera with OV2710 CMOS sensor with a resolution of 1945x1109 px. It communicates via a parallel interface. ArduCAM U6034
Retired
No product available!
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
Retired
No product available!
USB converter module - FIFO, FT245 with USB A and goldpin connector
Retired
No product available!
No product available!
HK HobbyKing Brushless Car ESC 45A w/ Reverse (13445)
Retired
No product available!
The DDS generator with alphanumeric display allows you to generate sine, rectangular or triangle waveforms with a frequency of up to 5MHz. The device can also be used to measure frequencies in the 1Hz-60MHz range.