- Out-of-Stock

A minisumo class robot from Pololu based on a tracked chassis. Dimensions (approx. 100 mm x 100 mm) and weight (approx. 300 g with batteries) allow the robot to be used as a minisumo platform in popular competitions for pupils and students organized around the world.
Zumo 32U4 is a robot based on ATmega32U4 MCU compatible with Arduino. It has two H-bridge motor controllers and a series of integrated sensors, including a pair of quadrature encoders for closed-loop motor control, a complete inertial measurement unit (3-axis accelerometer, gyro and magnetometer), five reflection sensors for line or edge detection, and proximity sensors forward and sideways for detecting obstacles and determining the distance from an obstacle. The three buttons offer a convenient user input interface, while the LCD display, buzzer and LEDs give feedback to the operator. The robot is equipped with two Pololu 100: 1 HP motors with a metal gear.
Attention!
The kit does not include the four AA batteries necessary to start the robot. They must be purchased separately.The robot has a built-in microcontroller with an Arduino Leonardo compatible bootloader. As a result, the programming process of the robot does not require an additional programmer, and the controller is programmed via the USB port.
The robot has extensive support in the form of Arduino libraries for all the systems available on the board. It is also available as a set with a complex robot in a version with motors with a gear 50:1, 75:1 and as a kit for self-assembly.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
Tracked chassis kit for the Pololu Zumo minisumo robot. The kit does not contain motors, batteries and electronic components. Pololu 1418
AA/LR6/R6 alkaline battery with 1.5V voltage. 6 pcs. GP15AU
AA/LR6/R6 alkaline battery with 1.5V voltage and capacity 3000mAh. 4 pcs. Maxell BLR06
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 4990
No product available!
Introduction to Digital Design. Block Diagram / Verilog Examples; Richard E. Haskell & Darrin M. Hanna
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
Development board with an ESP32 module based on a 32-bit Xtens LX6 processor. It has been equipped with a number of peripheral systems such as RGB LED matrix, accelerometer, magnetometer, gyroscope, light sensors and programmable buttons. Banana Pi BPI-Bit
No product available!
PCB board and programmed circuit for a simple unipolar stepper motor driver. AVT1814 A
No product available!
AVT kit for self-assembly of SNAKE electronic game. AVT5639 B
No product available!
SBC computer with Quad-Core ARM processor Samsung Exynos4412 (Cortex-A9 1.5GHz), 1GB RAM, LCD7 ", RoHS
No product available!
No product available!
No product available!
SUNON DC Axial Fan is a high-quality device that combines quiet operation, low power consumption and efficiency, ideal for use in advanced electronic and mechanical systems. Sunon HA40101V4-A99-A
No product available!
AVT kit for self-assembly of an adjustable symmetrical voltage supply. AVT1882 B
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Black
No product available!
Development kit with STM32F107 microcontroller and ST802RT1A ethetnet controller.
No product available!
No product available!
Male terminal block, angled, 12-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
No product available!
Mobile battery with a capacity of 8000 mAh, with flashlight function, for charging portable electronic devices, powered by 5V. The Power Bank is charged via the micro USB connector
No product available!
A minisumo robot on a tracked chassis with Pololu 100:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3127