- Out-of-Stock
Pololu 3125 - Zumo 32U4 Robot (Assembled with 50:1 HP Motors)
ID: 566232
A minisumo robot on a tracked chassis with Pololu 50:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3125
Our offer includes a newer version of the robot with an OLED display:
Zumo 32U4 OLED Robot (Assembled with 50:1 HP Motors)
Description
A minisumo class robot from Pololu based on a tracked chassis. Dimensions (approx. 100 mm x 100 mm) and weight (approx. 300 g with batteries) allow the robot to be used as a minisumo platform in popular competitions for pupils and students organized around the world.
Zumo 32U4 is a robot based on ATmega32U4 MCU compatible with Arduino. It has two H-bridge motor controllers and a series of integrated sensors, including a pair of quadrature encoders for closed-loop motor control, a complete inertial measurement unit (3-axis accelerometer, gyro and magnetometer), five reflection sensors for line or edge detection, and proximity sensors forward and sideways for detecting obstacles and determining the distance from an obstacle. The three buttons offer a convenient user input interface, while the LCD display, buzzer and LEDs give feedback to the operator. The robot is equipped with two Pololu 50:1 HP motors with a metal gear.
Attention!
The kit does not include the four AA batteries necessary to start the robot. They must be purchased separately.The robot has a built-in microcontroller with an Arduino Leonardo compatible bootloader. As a result, the programming process of the robot does not require an additional programmer, and the controller is programmed via the USB port.
The robot has extensive support in the form of Arduino libraries for all the systems available on the board. It is also available as a set with a complex robot in a version with motors with a gear 75:1, 100:1 and as a kit for self-assembly.
Features
- Two Pololu 50:1 HP motors motors with a metal gear
- Module with IR reflective sensors for line and edge detection
- Two single-channel DRV8838 motor controllers
- Piezoelectric buzzer
- LSM303D 3-axis digital accelerometer and magnetometer
- L3GD20H 3-axis digital gyroscope
- 3.3 V and 5 V stabilizer
- Prototype area for the user
- Arduino libraries
- Power supply: 4 x AA battery (not included)
- Dimensions: 98 x 98 x 39 mm
- Weight: 170 g (without batteries)
566232
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł117.17
24h
Available quantity: 2
Available
Tracked chassis kit for the Pololu Zumo minisumo robot. The kit does not contain motors, batteries and electronic components. Pololu 1418
zł107.27
24h
Available quantity: 1
Available
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 4990
zł586.50
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
No product available!
No product available!
hb03w-p-000-00
Delivery date unknown
No product available!
No product available!
No product available!
Adafruit 2486 - NETduino 3 WiFi is an open source electronics platform using the .NET Micro Framework
Retired
No product available!
The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.
Retired
No product available!
Arduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino. The board has built- in WiFi, supports 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connector, an ICSP header, two reset buttons and one user button.
Retired
No product available!
The Arduino 4 Relays Shield allows your Arduino driving high power loads that cannot be controlled directly by Arduino\'s digital pins. The Shield features four relays, each relay with 2 pole changeover contacts (NO and NC). Four LEDs indicate the on/off state of each relay. (A000110)
Retired
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
Retired
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
Retired
No product available!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field. A000070
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
Plastic holder that could fit all the boards with Arduino UNO size (68,6 mm x 53,4 mm). Contains 5 pieces in different colours. A000018
Delivery date unknown
No product available!
A minisumo robot on a tracked chassis with Pololu 50:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3125