- Out-of-Stock
zł269.01
Case for Raspberry Pi 4B, black (with fan)
ID: 581077
The case is made of ABS plastic (black) with a built-in fan, designed for Raspberry Pi 4 model B. The case provides access to all connectors of the minicomputer.
Description
The case is made of ABS plastic (black) with a built-in fan, designed for Raspberry Pi 4 model B. The case provides access to all connectors of the minicomputer. Twisted with 4 bolts. The set includes heat sinks and rubber feet.
Kit contains
- 2-piece plastic case
- Fan
- Set of heat sinks
- Set of screws
581077
Data sheet
- Compatible with
- Raspberry Pi 4 B
- Montage
- Brak
- Access to GPIO
- Yes
- Assembly
- screws
- Włącznik
- Nie
- Houses camera
- No
- Fan
- with mounted fan
- Houses screen
- without screen bracket
- Colour
- Black
- Materiał
- Plastik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 30
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 72
Available
Other products in the same category (16)
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
Retired
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 30V and current in the range of 0 to 10A. Wanptek KPS3010D
Retired
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 30V and current in the range of 0 to 5A. Wanptek KPS305D
Retired
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 60V and current in the range of 0 to 5A. Wanptek KPS605D
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with Lightning connector. Allows you to charge the device and transfer data. eXtreme S15ULB
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with Lightning connector. Allows you to charge the device and transfer data. eXtreme S15ULW
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with US Type C connector. Allows you to charge the device and transfer data. eXtreme S15UCB
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with US Type C connector. Allows you to charge the device and transfer data. eXtreme S15UCW
Retired
No product available!
The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMB
Retired
No product available!
The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMW
Retired
No product available!
Board with ATmega32U4 and Atheros AR9331. It combines the advantages of a microcontroller and a microprocessor with Linux. The set has 32 KB flash memory, 20 digital inputs / outputs, including the ability to configure 7 as PWM channels and 12 as analog inputs (ATmega32U4) as well as a WiFi module and a microSD card slot (Atheros AR9331). Arduino Yún Rev2
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATA8520 SigFox module enabling the implementation of SigFox communication. Arduino MKR FOX 1200 ABX00014
Retired
No product available!
Board is a board with Atmel ATSAMW25 chip, the system has SAMD21 microcontroller (ARM, Cortex-M0+ core, 256 kB Flash, 8 KB SRAM) treated with 48 MHz clock. The ATSAMW25 chip also includes the WINC1500 Wi-Fi module. The user has at his disposal: 8 I/O lines, 12 PWM channels, 7 analog inputs. Arduino MKR1000 ABX00004
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the CMWX1ZZABZ module enabling the implementation of communication in Lo-Ra networks. Arduino MKR WAN1300 ABX00017
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018
Retired
No product available!
Intelligent Wi-Fi plug. It automatically controls lighting, heating and any other connected electrical appliance. Shelly Plug S
Retired
No product available!
The case is made of ABS plastic (black) with a built-in fan, designed for Raspberry Pi 4 model B. The case provides access to all connectors of the minicomputer.